New Build: 2001 SA50 AF16 72cc,Malossi,Polini Ect..

[Hppowdercoatings]

oh, and I have some black die cuts in transit.




silencer is black though

What's price on that pipe ? Color does not matter, I will Ceramic coat it Black anyway..lol

[veedubh20]

8.4 gear is good setup with stock pipe/ 24mm carb

[Hppowdercoatings]

8.4 gear is good setup with stock pipe/ 24mm carb

I ended up swapping in the 8:44 set I got from G9 . Also picked up the Polini white & Blue Center Springs, and a set of 1500/2000 Rpm Clutch springs to try out..

[LMH]

Are you interested in using one of my pipes for a bit until you want to buy one? I can drop one off when I pick up the cases.

[Hppowdercoatings]

Are you interested in using one of my pipes for a bit until you want to buy one? I can drop one off when I pick up the cases.

Yes That would be Great..

[LMH]

Do you want to try the malossi wild lion, gianelli, or Scorpion?

[Hppowdercoatings]

Do you want to try the malossi wild lion, gianelli, or Scorpion?

Scorpion or Malossi ..

[LMH]

I'll bring the scorpion and if it's not good on that cylinder I'll bring the wild lion some time after.

[Hppowdercoatings]

Ok last Time out tuning in Oct-2014
12:1 gears
Stock/Modified exhaust
Polini 24mm carb
105/45 Jetting ,Looked a little Fat.
50.4 mph-GPS

4-26-2015
8:44 Gears installed
108/42 Jetting . Close to Good.
V8 pipe from (Ruckenstien).
Added a Trail Tech TTO Temp gauge.. Last little run Temp hit 375
Not Sure what Rpms were but let out of Throttle at 62-Mph on Gps..
37.8 grams Total rollers. Blue polini Main Spring, Black/gunmetal clutch springs..
Thinking I should try the green or Yellow springs for better takeoff ?
I also need to get get a Rpm Gauge..

Any Suggestions ?

[Wheelman-111]

Greetings:

Since you asked for suggestions...
For WHAT? At 62 - and "letting off" - I believe you're outgunning most if not all 47cc Cast-Iron builds already. Only way you can improve performance now is to go MHR, Corsa or Fabrizi if you want to stay reliable. Ministroke and port the snot outta that Cast kit or full-stroker if you don't.

[Hppowdercoatings]

Greetings:

Since you asked for suggestions...
For WHAT? At 62 - and "letting off" - I believe you're outgunning most if not all 47cc Cast-Iron builds already. Only way you can improve performance now is to go MHR, Corsa or Fabrizi if you want to stay reliable. Ministroke and port the snot outta that Cast kit or full-stroker if you don't.

Sorry it's a Mallosi cast 72cc bbk..

[Hppowdercoatings]

Finished a Little tuning Today ..
Happy where it is for now..

Not sure on Rpms yet..
24mm polini
108/42 jetting
1.5 Turns out on a/f screw
37.8 g roller Total
Blue Polini Contra/center Spring
Swapped out the 1000-rpm Gunmetal clutch springs with the 3000-rpm yellow springs.
Love the Change in take off, half throttle it wants to Start to wheelie..
And still pulls to 60+ mph without a problem...After about 30-min & pull to about 60-mph the max temp Reading was 370....