50mm Big Bore Elite S Build
Moderator: Moderator
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 50mm Big Bore Elite S Build
I added a head gasket and now comp is 140 psi.
Lack of local place to get combined with price of race fuel made me do it
Any Suggestions on where to start with this setup
50mm bore ministroked with 30mm oko carb.
What jet should I start with. I have no clue on carb settings in this type of carb.
Lack of local place to get combined with price of race fuel made me do it
Any Suggestions on where to start with this setup
50mm bore ministroked with 30mm oko carb.
What jet should I start with. I have no clue on carb settings in this type of carb.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: 50mm Big Bore Elite S Build
for the jetting, 52 pilot 135 main needle 1 clip up from middle and air fuel screw 1 3/4 turns out as your starting point.Trafficjamz wrote:I added a head gasket and now comp is 140 psi.
Lack of local place to get combined with price of race fuel made me do it
Any Suggestions on where to start with this setup
50mm bore ministroked with 30mm oko carb.
What jet should I start with. I have no clue on carb settings in this type of carb.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: 50mm Big Bore Elite S Build
call any of the performance car shops and ask them where to buy race gas from.if there is a drag strip near you then there should be alot of places within a 50mile radius that sells race gas.call the go-kart shops too.those guys use race gas in there karts.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 50mm Big Bore Elite S Build
I looked at the jets in my OKO carb today
39 pilot
139 Main jet
I don't have any different pilot jets right now.
The scooter started right up with these jets in it. It seems to run pretty good.
I will post more results after I actually ride it. I still wanna do a few more heat cycles.
39 pilot
139 Main jet
I don't have any different pilot jets right now.
The scooter started right up with these jets in it. It seems to run pretty good.
I will post more results after I actually ride it. I still wanna do a few more heat cycles.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 50mm Big Bore Elite S Build
Just some new pics of the 30m OKO and new tuned pipe.
I did ride it down the street Holy S**t this bike is gonna be fast!
It Has 8.4:1 gears in it, and it wants to wheelie!
I did ride it down the street Holy S**t this bike is gonna be fast!
It Has 8.4:1 gears in it, and it wants to wheelie!
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: 50mm Big Bore Elite S Build
do you have to run it with the choke pulled?Trafficjamz wrote:I looked at the jets in my OKO carb today
39 pilot
139 Main jet
I don't have any different pilot jets right now.
The scooter started right up with these jets in it. It seems to run pretty good.
I will post more results after I actually ride it. I still wanna do a few more heat cycles.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 50mm Big Bore Elite S Build
bakaracer wrote:do you have to run it with the choke pulled?Trafficjamz wrote:I looked at the jets in my OKO carb today
39 pilot
139 Main jet
I don't have any different pilot jets right now.
The scooter started right up with these jets in it. It seems to run pretty good.
I will post more results after I actually ride it. I still wanna do a few more heat cycles.
You are so smart. Yes...yes I do have to run it with the choke pulled. Is this because of my too small pilot jet?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: 50mm Big Bore Elite S Build
yup! I wouldn't run it like that.just in case that choke plunger goes back down from riding or hitting a bump.if you keep riding it like that without getting the ridght jets,thats just asking for it to blow up.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 50mm Big Bore Elite S Build
I need a uni filter to fit a 30mm oko carb
Does anyone know a model number for the uni that will fit my carb?
Does anyone know a model number for the uni that will fit my carb?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 50mm Big Bore Elite S Build
Where can I get pilot jets?bakaracer wrote:yup! I wouldn't run it like that.just in case that choke plunger goes back down from riding or hitting a bump.if you keep riding it like that without getting the ridght jets,thats just asking for it to blow up.
A link on ebay would be the best.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: 50mm Big Bore Elite S Build
go to your local motorcycle shop.they carry the jets you need.take the jets with you because if you tell them you needs jets for a oko carb.they are going to look at you funny.it uses keihin pwk jets. get a 50,52,55 just in case and your mains just go on ebay and type in oko in ebay motors.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 50mm Big Bore Elite S Build
Thanks.bakaracer wrote:go to your local motorcycle shop.they carry the jets you need.take the jets with you because if you tell them you needs jets for a oko carb.they are going to look at you funny.it uses keihin pwk jets. get a 50,52,55 just in case and your mains just go on ebay and type in oko in ebay motors.
I have a whole set of main jets 125-150 I think
How do I know which Uni filter fits my carb?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: 50mm Big Bore Elite S Build
measure the outside mouth of the carb.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Wheelman-111
- Moderator
- Posts: 11321
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: 50mm Big Bore Elite S Build
Greetings:
The 2" UNI fits my 28/30mm OKO. Is your "30" also an oval venturi? 28 wide but 30mm tall? Get the model # from the UNI website, but order locally - no shipping!
The 2" UNI fits my 28/30mm OKO. Is your "30" also an oval venturi? 28 wide but 30mm tall? Get the model # from the UNI website, but order locally - no shipping!
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 50mm Big Bore Elite S Build
Got to this speed in less than 1/2 mile @ 1/4 throttle
Tomorrow I am going to the 1/8 mile dragstrip with this scooter.
My old time was 16.681 @ 38mph
I am almost hitting 50mph in the 1/8 mile now. I can't wait
Tomorrow I am going to the 1/8 mile dragstrip with this scooter.
My old time was 16.681 @ 38mph
I am almost hitting 50mph in the 1/8 mile now. I can't wait
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight