Page 1 of 2
finally done a spreedio
Posted: Fri Apr 29, 2011 8:04 pm
by monkeywrench
Re: finally done a spreedio
Posted: Fri Apr 29, 2011 9:52 pm
by Wheelman-111
Greetings:
Nice work MW. Turned the unpretentious Spree into a vehicle that'll hold its own in city traffic.
The engine hanger looks good!
Re: finally done a spreedio
Posted: Fri Apr 29, 2011 10:40 pm
by monkeywrench
Wheelman-111 wrote:Greetings:
Nice work MW. Turned the unpretentious Spree into a vehicle that'll hold its own in city traffic.
The engine hanger looks good!
thanks! i used the elite hanger but cut the clutch cover side off a bit to fit down in the spree frame while centering the back wheel perfectly with the frame its pretty much a no brainer. the wiring was simple for the stator. i just cut off the connector from the spree stator and used the colors of the wires to the elite stator. the wire colors for both the spree and elite r the same. the bystarter is from the elite so i just cut the wires and reversed them so it would be yellow and green. im using the elite rectifier because the rectifier from the spree kept blowing tail lights and head light. i now have a modified head lamp for halogen bulbs. easy change in and out.
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 12:33 am
by xxjareebxx
Looks real nice, would you sell one of your dios with a bad crank?
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 1:08 am
by monkeywrench
xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 1:18 am
by Trafficjamz
How much for a case?
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 1:48 am
by xxjareebxx
monkeywrench wrote:xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.
How much for everything but the top end and crank with he shrouds?
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 1:49 am
by monkeywrench
Trafficjamz wrote:How much for a case?
id say 50.00 plus shipping
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 1:52 am
by monkeywrench
xxjareebxx wrote:monkeywrench wrote:xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.
How much for everything but the top end and crank with he shrouds?
the shrouds i have r crap! but for the stator carbs intake and cases. id say 80.00 plus shipping.
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 1:56 am
by monkeywrench
xxjareebxx wrote:monkeywrench wrote:xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.
How much for everything but the top end and crank with he shrouds?
ill line up everything i have tommarow and take picks
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 2:11 am
by xxjareebxx
Alright ill take it but could you wait till like Wednesday still have some scoots that could be a dio
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 2:32 am
by monkeywrench
xxjareebxx wrote:Alright ill take it but could you wait till like Wednesday still have some scoots that could be a dio
ok! i didnt plan on selling so i can wait tell wednesday. dont really need the money but i need to get rid of some stuff.
Re: finally done a spreedio
Posted: Sat Apr 30, 2011 12:50 pm
by xxjareebxx
monkeywrench wrote:xxjareebxx wrote:Alright ill take it but could you wait till like Wednesday still have some scoots that could be a dio
ok! i didnt plan on selling so i can wait tell wednesday. dont really need the money but i need to get rid of some stuff.
Alright sweet
Re: finally done a spreedio
Posted: Sun May 01, 2011 1:30 am
by fastplastic
Take some pics of how kick stand it mounted
Re: finally done a spreedio
Posted: Sun May 01, 2011 8:03 pm
by monkeywrench
fastplastic wrote:Take some pics of how kick stand it mounted
i will do this tommarow as it is pouring rain right now