My First Spree Swap (Aero NH125)

patthesoundguy · Post by **patthesoundguy** » Sun Apr 03, 2016 5:08 pm

Might need adhesion promoter for plastic to get it to stick. Sometimes primer will make it work but I had an auto body supply shop tell me that for bare plastic that's the trick. I have some but have yet to try it as I haven't had to do any bare plastic yet. I find that as long as I get the surface clean with acetone properly everything is good.

Tyler VR · Post by **Tyler VR** » Sun Apr 03, 2016 6:05 pm

Thanks for the tips guys, I used the krylon fusion on my ch80 spree paint job and was happy with the results so I'm using it again. Prep is always the key to a good paint job, I usually heat up the surface with my heat gun and also warm up my garage with a space heater.

Tyler VR · Post by **Tyler VR** » Sun Apr 03, 2016 11:39 pm

Doing some body work on the bubble I did with my heat gun. I used Fusor plastic filler, sanded, then a bondo top coat, still need to sand down one more time.

Wheelman-111 · Post by **Wheelman-111** » Mon Apr 04, 2016 1:01 am

Greetings;:

A Power Bulge. Nice.

Tyler VR · Post by **Tyler VR** » Mon Apr 04, 2016 10:40 pm

Repaired a broken mounting hole on the side plastic, hope it holds.

MrJumps · Post by **MrJumps** » Mon Apr 04, 2016 10:48 pm

I just drilled new holes and used zipties lol, guess the qaulity will really show afterwards. Wish I actually had a thing for looks, but im more of if it works, use if it looks good so what. But its still eye candy to have looks too. I would still pay for the eye candy, but yet its not my style. Good build so far and that power buldge isnt the only budlge that thing is sporting.

im refering to the monster motor

Tyler VR · Post by **Tyler VR** » Wed Apr 06, 2016 4:22 pm

Before I was using large washers to hold the panels with broken mounting holes, it worked.

It takes a lot of patience to make things nice, at some point you call it good enough because you just want to ride. That's why I usually do projects during the winter, now spring is kicking in though.

Tyler VR · Post by **Tyler VR** » Wed Apr 06, 2016 4:26 pm

Getting ready to paint the body parts.

Wheelman-111 · Post by **Wheelman-111** » Wed Apr 06, 2016 8:25 pm

Greetings:

I'm confident your scooter will run strong and look good. The pains you take will be totally worthwhile.

Tyler VR · Post by **Tyler VR** » Sun Apr 10, 2016 3:36 pm

Wheelman-111 wrote:Greetings:

I'm confident your scooter will run strong and look good. The pains you take will be totally worthwhile.

Thanks Wheelman, Building up scooters is a fun hobby.

Tyler VR · Post by **Tyler VR** » Sun Apr 10, 2016 3:44 pm

Paint is done!

MrJumps · Post by **MrJumps** » Sun Apr 10, 2016 3:47 pm

Address please hahahaha

Looks amazing, that power budge and gloss white <3

Tyler VR · Post by **Tyler VR** » Sat Apr 16, 2016 4:28 pm

MrJumps wrote:Address please hahahaha

Looks amazing, that power budge and gloss white <3

Thanks man, turned out pretty good for rattle can paint.

Tyler VR · Post by **Tyler VR** » Sat Apr 16, 2016 4:42 pm

I decided to put a pipe on my nh125, it has to be custom fit because no one makes pipes for the nh125. The best option was a pipe made for a dio, this is the cheapest I could find that had a silencer.

1man8scoots · Post by **1man8scoots** » Sat Apr 16, 2016 9:00 pm

Is it a 125 pipe? Freaking sweet build. Spaero 125!

Honda Spree and Elite 50 Forums

My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)

Re: My First Spree Swap (Aero NH125)