MONSTER Spree
Moderator: Moderator
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
MONSTER Spree
A member of my family recently died leaving me a large sum of money... This is the only reason I can swing this monster build. I will enjoy the final rides of my 86cc spree. Let the transformation begin
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- SuprasNsprees
- Elite
- Posts: 564
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: MONSTER Spree
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
-
- Elite
- Posts: 722
- Joined: Thu Apr 19, 2007 6:40 pm
- Location: oregon coast
Re: MONSTER Spree
while it is neat that you acquired some money. This thread is useless without and relative scooter info. What are you going to do to your scooter?
Also, i hate hearing of people that run into money and have to get it spent asap, because its "free money" and free money means shopping spree. My advice, keep at least 3 months wages saved up. Having only a few $1,000 in your bank account doesn't go very far when the transmission goes out in your car the week after you get fired, etc.
Also, i hate hearing of people that run into money and have to get it spent asap, because its "free money" and free money means shopping spree. My advice, keep at least 3 months wages saved up. Having only a few $1,000 in your bank account doesn't go very far when the transmission goes out in your car the week after you get fired, etc.
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: MONSTER Spree
I would like to keep the build as a suprise Not really its obvious im going to step it up past 100cc Im 15 the tranny isnt going to blow. And Its my money I can spend how ever much I want
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
Re: MONSTER Spree
if you decide to change any of those upgrade parts hook a brotha up I am about to start on a complete af16 motor build over the winter... starting with a bare block sorry to hear an apparently beloved relative passed away, my condolences. While I agree with Pimpinspree about saving money, that is hard to do especially at 15 Some people deal with grief by buying a bunch of stuff so have at it just make sure to have a decal made in memory of this deceased loved one to place on the scooter somewhere
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: MONSTER Spree
Well my first sketch out is 130cc stroker with the big black intake not sure on the carb ill take suggestions for the BEST one and I want two or three of the same carb jetted for humid, colder or any other weather. The scorpion of course and some other suprises
If there is anything that is expensive but will really help please tell me Im open for suggestions
If there is anything that is expensive but will really help please tell me Im open for suggestions
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
Re: MONSTER Spree
SpreeMadness520 wrote:Well my first sketch out is 130cc stroker with the big black intake not sure on the carb ill take suggestions for the BEST one and I want two or three of the same carb jetted for humid, colder or any other weather. The scorpion of course and some other suprises
If there is anything that is expensive but will really help please tell me Im open for suggestions
Nothing but a silly *
You get a "large sum" of money and want to blow it on a Honda Spree? Come on dude.
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
Re: MONSTER Spree
dont worry ill build a motor for you .. i love spending other peoples cash !
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: MONSTER Spree
A large sum of money is a little more than a few thousand....The total of the build will be under 1 thousand tru 72 hook me up
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- SuprasNsprees
- Elite
- Posts: 564
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: MONSTER Spree
wiguy05 wrote:
Nothing but a silly *
You get a "large sum" of money and want to blow it on a Honda Spree? Come on dude.
doesn't sound 15 at all does he ?
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: MONSTER Spree
Under 1k for a 130cc setupSpreeMadness520 wrote:A large sum of money is a little more than a few thousand....The total of the build will be under 1 thousand tru 72 hook me up
It will never happen
$200 for a carb and you want two of them = $400
$350 for a scorpion pipe
$150 for the Big Black intake and reeds .......now we are at $800 and still have not got a 130cc bbk.
ZX trans, new variator, new clutch, new belt, It adds up fast.
Add in machine work for the block too.....this stuff just don't bolt together
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: MONSTER Spree
I'm selling my old 86cc parts to help out but I will be fine
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: MONSTER Spree
Good luck. Make sure to post some pics for us. Who cares if he spends the money. The dollar aint worth s*** anyways. lol
Taz
Taz
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: MONSTER Spree
polini adjustable clutchSpreeMadness520 wrote:If there is anything that is expensive but will really help please tell me Im open for suggestions
Aluminum frame
Ceramic bearings
flywheel lightening or custom stator setup.
Velocity stack
variator boss shim kit
EGT gauge
Race slicks
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: MONSTER Spree
Where do I get the big black intake? What would be the best carb for my set up?
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa