All:
Will use following to document how the Spree pipes get built.
First, need a chamber. This is what we'll be using:
And you need a downpipe:
or
Spree Highway Speed Pipe build
Moderator: Moderator
Spree Highway Speed Pipe build
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Re: Spree Highway Speed Pipe build
sounds interesting... and fun
86 spree with honda cb750 rear shock
xr50 knobby tires, 32mph on slightly restricted craftsman air filter.
Scooter was stolen so i have to make it look good again
xr50 knobby tires, 32mph on slightly restricted craftsman air filter.
Scooter was stolen so i have to make it look good again
Re: Spree Highway Speed Pipe build
Looking forward to getting mine. BTW has anyone ever recorded one of your pipes with the motor running? I'm curious how they sound.
1984 Honda Spree
1986 Honda Spree
1984 Spree Iowa
1984 Honda Gyro
Like other little Honda's? How about a 1969 Honda Z50?
1986 Honda Spree
1984 Spree Iowa
1984 Honda Gyro
Like other little Honda's? How about a 1969 Honda Z50?
Re: Spree Highway Speed Pipe build
They sound like a dirt bike to me.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Re: Spree Highway Speed Pipe build
I did about the same thing on a Yamaha Zuma 50
I ran it for while but thought that on the zuma with a stock cylinder it needed a lower rpm band and cut the center section out and welded in a piece of tubing. Ending up with this.
Back to your build Noiseguy!
I ran it for while but thought that on the zuma with a stock cylinder it needed a lower rpm band and cut the center section out and welded in a piece of tubing. Ending up with this.
Back to your build Noiseguy!
1989 Elite E with 86cc Dio
Rumia 50mm bore, mini-stroker, 28mm Oko, modified m-x pipe, Carbonfiber reinforced frame.
http://www.youtube.com/watch?v=gKSvdjxvBUA
Rumia 50mm bore, mini-stroker, 28mm Oko, modified m-x pipe, Carbonfiber reinforced frame.
http://www.youtube.com/watch?v=gKSvdjxvBUA
- kingkamehameha
- CB900F
- Posts: 1215
- Joined: Sat Apr 16, 2011 1:11 pm
- Location: kailua kona
Re: Spree Highway Speed Pipe build
If anyone knows how to build 2t pipes its you!elitedio wrote:I did about the same thing on a Yamaha Zuma 50
I ran it for while but thought that on the zuma with a stock cylinder it needed a lower rpm band and cut the center section out and welded in a piece of tubing. Ending up with this.
Back to your build Noiseguy!
ua mau ke 'ea o ka aina i ka pono o hawaii
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Spree Highway Speed Pipe build
its really not that hard to do if you have time a welder and some pipes to work with a bit of trial and error you get the hang of it as you go and learn what works and what doesnt
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250