I have an 86 Spree that I have stripped the Upper & Lower Guage / headlight plastics off of, Stripped the fender, and cut the Rear fairings. They're on my deck today and I am in the process of [60grit to 220grit wet to TSP/dawn soap bath] prepping for flat black rustoleum primer coat. I am planning on using DAP plastic filler for the holes in the paneling (since i deleted the blinkers FR/RR).
I need to know if anyone has had success swapping out the stock speedo for a universal / other Honda speedo? I want the old school stripped rat rod clean vintage look up top (Ive already deleted most of the excess wiring harness). I really want the build to turn out looking clean skelly.
Ill post some pictures of my progress on the bike this evening after I get some more of this plastic cleaned up.
86 Spree Industrial / Skelly Build...
Moderator: Moderator
86 Spree Industrial / Skelly Build...
1986 Honda Spree Partial Skelly w/ custom exhaust 8500miles
- stucinthe80z
- Spree
- Posts: 124
- Joined: Tue Jun 12, 2012 7:04 am
- Location: PNW
Re: 86 Spree Industrial / Skelly Build...
might try on from a honda express or rucus
86 Spree Industrial / Skelly Build...
I would look at the trail tech vapor. If it will work on a Spree that I don't know.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.