Just picked up a 01 elite s
Bone stock
This will be my first dio build I have always been jog type but since my move to the mainland from Hawaii the honda bikes are easier to find here and jogs are pretty difficult it seems but I will most likely pick one up also if I find one close
I'm not planning on going to crazy just going to go with a bolt on bore for now
My first question is .. Mallosi or polini?? I've always used polini on jogs but just looking for opinions for dio
Pictures will follow when the bike indoors (winter build)
Starting a fresh new 01 elite s build tips welcome
Moderator: Moderator
Starting a fresh new 01 elite s build tips welcome
01 elite S
New build
05 rexy
72polini,Leo Vince sp3,9-1,mikuni28,Kelli,dr pulley22.5gs,stage6clutch,high flow fan,1k shoes,stock 90cs,drag bars,ultra bright mini halogen,koso tach,garmin GPS,WOLO air horn,STOLEN,RECOVERED,SOLD!!
New build
05 rexy
72polini,Leo Vince sp3,9-1,mikuni28,Kelli,dr pulley22.5gs,stage6clutch,high flow fan,1k shoes,stock 90cs,drag bars,ultra bright mini halogen,koso tach,garmin GPS,WOLO air horn,STOLEN,RECOVERED,SOLD!!
Re: Starting a fresh new 01 elite s build tips welcome
both are good . polini corsa and contesta bore bolt on. can use stock goshi pipe on any polini bores. (corsa or contesta), can used mikuni 18mm vm carb on stock airbox. use 8:1 gear and keli pulley/ramp.
malossi bore need to port on the boost to match malossi base gasket.
my japan jog i ran contesta bore with stock carb 14mm, airbox, stock pipe.. , daytona pulley/ramp,, all stock trans.. no problem..
malossi bore need to port on the boost to match malossi base gasket.
my japan jog i ran contesta bore with stock carb 14mm, airbox, stock pipe.. , daytona pulley/ramp,, all stock trans.. no problem..