First spree AF16 motor swap. more photos of motor work.

deuce217 · Post by **deuce217** » Mon Dec 23, 2013 12:06 am

Great photos. Looks like a VW gasket. I have bought several to keep on hand. I was abe to get them for about .47 cents each through an auto parts store.

ped · Post by **ped** » Tue Dec 24, 2013 11:43 am

thank you deuce. better photos of port.

ped · Post by **ped** » Tue Dec 24, 2013 11:47 am

the plug holder. I got the idea from the forum. thank you whom ever it was. Very nice people in this forum.

swimmingfree · Post by **swimmingfree** » Tue Dec 24, 2013 11:50 am

you may need some goo behind that quarter....
swimmingfree

ped · Post by **ped** » Tue Dec 24, 2013 11:50 am

hi swim. there a oil plug behind the quarter. almost done with the carb & pipe install

ped · Post by **ped** » Tue Dec 24, 2013 11:53 am

ped wrote:the plug holder. I got the idea from the forum.

its tight I have blue Loctite on threads.

maybe I will use a little.

swimmingfree · Post by **swimmingfree** » Tue Dec 24, 2013 12:00 pm

if air leeks by the quarter it will run lean and we all no what that means....
swimmingfree

ped · Post by **ped** » Tue Dec 24, 2013 12:10 pm

swimmingfree wrote:if air leeks by the quarter it will run lean and we all no what that means....
swimmingfree

A hole on the piston? oh! your saying the o-ring is not enough. got it . thanks will do more sealing.

swimmingfree · Post by **swimmingfree** » Tue Dec 24, 2013 12:14 pm

better to be sure that all is leak free...
swimmingfree
ps
you have a good read and nice photo as welll

ped · Post by **ped** » Tue Dec 24, 2013 12:44 pm

swimmingfree wrote:better to be sure that all is leak free...
swimmingfree
ps
you have a good read and nice photo as welll

thank you again swimmingfree. just like this fourm helped me , maybe it will help someone else

.

ped · Post by **ped** » Tue Dec 24, 2013 5:35 pm

graphite9 wrote:Ped, I have the correct carb cable for your oko. Your going to have issues with how you have it set up now. I doubt your slide will even close with that cable. It will probably start at 1/3-1/2 throttle

thanks graphite. I not finish with setup. did you noticed how close the pipe is to the fan shroud? looks like I will have to order some exhaust wrap for the pipe.

ped · Post by **ped** » Tue Dec 24, 2013 8:22 pm

my new premix oil baby bottle. holds 9 OZ. $1 at dollar store

refl3x · Post by **refl3x** » Fri Dec 27, 2013 12:13 pm

did someone say scooters in civics?

is that throttle cable in the picture above off of the spree?

ped · Post by **ped** » Fri Dec 27, 2013 11:56 pm

refl3x wrote:did someone say scooters in civics?

is that throttle cable in the picture above off of the spree?

I see you need to take your scooter other places too

yes the cable is off the spreedio. just waiting on CHT gauge. to install together.

ped · Post by **ped** » Sun Dec 29, 2013 4:25 am

I did the pilot jet trick. some one on the forum showed how. I can't remember who. thanks for the tip.

I cut away a little on the bowl. so the pilot jet will come out, without taking the bowl out.

for the person who posted that trick.

Thanks for the tip cruzingratiot . you have a very nice detail build.

Honda Spree and Elite 50 Forums

First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.

Re: First spree AF16 motor swap. more photos of motor work.