Page 2 of 10
Re: First spree AF16 motor swap
Posted: Mon Oct 14, 2013 6:00 pm
by ped
Kevinstonge wrote:You sir, need a trailer.
yes, your right kevin. but, have you ever found parking at hampton beach
better yet it takes two hours in traffic, to drive out of Hampton beach in a car.
and about 30 min. on a moped.
I don't know about traffic in maine beaches?
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 1:41 am
by ped
I cut the motor mount on one side only. to fit the spree frame.
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 1:50 am
by ped
I need to make sure mount is straight.
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 1:57 am
by ped
the shock will need to be moved to the seat lock area.
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 1:59 am
by paulpauly7
nice now you need a disk brake front end swap
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 1:59 am
by ped
it getting there.
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 2:00 am
by paulpauly7
two much shock angle like that
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 2:07 am
by ped
paulpauly7 wrote:nice now you need a disk brake front end swap
I may go with metro front end.
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 2:08 am
by ped
paulpauly7 wrote:two much shock angle like that
I know, i'm making a shock mount
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 4:10 am
by paulpauly7
cant really help there as im in New Zealand they arnt hard to find here and if you get one not going they are cheap.I just bought a pretty tidy running af27 dio for $80 and its only $130 to reregester it with new plates .Scooters here seem to be just cheap transport for 99% of people and scooters are just scooters doesnt matter if its chinese or japan if it dont go people practicly give them away. Thats where i come in bringi g them back to life and upgradeing them .Pm me your email ill send you some pics of my spree(niftyfifty)
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 3:33 pm
by ped
hello graphite9, I need the spree to be low so it fit in my trunk of the car.
thanks for the info I will move the shock.
Re: First spree AF16 motor swap
Posted: Wed Oct 16, 2013 9:55 pm
by Meejacob
THat engine mount ear is looking dangerously close to ground
Re: First spree AF16 motor swap
Posted: Thu Oct 17, 2013 6:01 am
by ped
I had to cut and extend part of the mount. next time I will try to insert a tube in the frame and weld it.
Re: First spree AF16 motor swap
Posted: Thu Oct 17, 2013 8:04 am
by Kevinstonge
Looking forward to seeing the shock mount extension installed. Also have you thought about the back seat options? I bet if you slide the seats forward you'd have plenty of room. The trunk idea I'm just not seeing... But to each their own;)
Re: First spree AF16 motor swap
Posted: Thu Oct 17, 2013 1:35 pm
by ped
Kevinstonge wrote:Looking forward to seeing the shock mount extension installed. Also have you thought about the back seat options? I bet if you slide the seats forward you'd have plenty of room. The trunk idea I'm just not seeing... But to each their own;)
hi kevin. no extension on this build. i'm looking for a low ride
. but a safe one