Million Dollar Scooter Build

[Limp1144]

Thanks tail light wired correctly. Waiting on exhaust now. What do people think of the oko airbox are they any good two are 115 shipped

[Limp1144]

Also i want to keep my jetting down to keep my gas bill down. any recommendations. 24mm, polini corsa, v8 pipe, 7 gram rollers, 9:1 gears

[LMH]

Don't go big bore if you want to save gas ha. The 24mm and up carbs are gas hogs and you should use a 19 or 21mm arreche if you're looking for a resolution that still gives performance and conservative fuel use.

[LMH]

I've heard good things about the oko air boxes and I think someone on here uses one currently. I've yet to ever try any air boxes.

[Limp1144]

I wonder if it makes less noise than the air filter would.

[Wheelman-111]

Greetings:

The OKO does little to reduce noise, but the rubber snorkel might improve the intake efficiency. Flash 5 ran faster with the OKO box than with a pod. Unfortunately it's let down by really crappy materials, My snorkel has cracked and all but split at the seam. I wish they sold the snorkel separately.

It's challenging to mount the box without kinking the snorkel. It's also prone to foul the black fender skirt if you run one. I used a heat gun to change the angle of the screw that bolts up to the case behind the shock. Then I got cute with washers and spacers to locate it as well as I could. It does offer a heavier carb a little support from astern.

[Limp1144]

Thanks wheelman you just saved me 115.00 thanks again.

[Limp1144]

I have never seen a stock bore seized here is the proof that people are idiots

[Limp1144]

Next I sanded down the CT intakes. I don't think 10 gals of gasket maker would ever make these things seal up.


Started with a 320 grit and 600 to smooth it out.

[Limp1144]

Next the big bore install

I sprayed down the cylinder with degreaser to get all machining metal out of the cylinder. I spray it down till the rag comes out clean.
I coated the piston, jug, rod bearing, and piston pin soaked in KLOTZ 2t racing oil. This stuff smells amazing.

[Limp1144]

Is it Christmas???┬┐┬┐┬┐




So simple a baby could premix

[Limp1144]

More parts came in today.

CNC Shock




Air Filter



Brake pads

Slotted Better stopping power


Slotted Clutch Bell, Looks like it might have a good bite.

[Limp1144]

No love lately from the forum

[PorterGuy85]

Looks sweet

Sent from my SPH-D710VMUB using Tapatalk

[Red Eft Performance]

Im watching....