Million Dollar Scooter Build

Limp1144 · Post by **Limp1144** » Fri Feb 28, 2014 9:20 am

2x polini corsa bores ordered. 500.00

Parts total $$$$$$1327.43$$$$$$

refl3x · Post by **refl3x** » Sat Mar 01, 2014 5:08 pm

yikes I guess i was lucky i got a 98 SR for $12.50

Limp1144 · Post by **Limp1144** » Sat Mar 01, 2014 5:11 pm

Who even came up with that number 12.50 hahahaha.
Bought two sets of wheel inserts 75.00

refl3x · Post by **refl3x** » Sat Mar 01, 2014 5:15 pm

it was two scooters for $25 one was crap so i stripped it to the frame to make a "drag" scooter the other only had around 500 miles and is pretty clean. maybe i missed it but why are you buying two of everything?

Limp1144 · Post by **Limp1144** » Sat Mar 01, 2014 9:21 pm

GO FAST PARTS
Thanks Taz

Glow in the dark throttle cables, 24mm carbs, 9:1 gears, CT intaaaaakkkeesss

This is looking smooth.

Limp1144 · Post by **Limp1144** » Sat Mar 01, 2014 9:23 pm

First person ever to use 3 variators on 1 scooter

DDX

SEF Ramp plate

Limp1144 · Post by **Limp1144** » Sat Mar 01, 2014 9:24 pm

This looks like it will take me to 60mph.

Limp1144 · Post by **Limp1144** » Sun Mar 02, 2014 6:15 pm

Tuning Question

I got an elite I fired up. When I turn the air screw out 1 turn from all the way in it revs up. Shouldn't the air screw be turned out 2.5 times. Does this mean I have too big of a pilot jet. I think I put a 48 pilot in a 26mm oko

LMH · Post by **LMH** » Sun Mar 02, 2014 9:15 pm

Too small of a pilot.

Limp1144 · Post by **Limp1144** » Sun Mar 02, 2014 10:10 pm

Any know where the wiring diagram is for the jdm taillight. I got it all ready to go back together but need the wiring for the tail light thanks.

Roger that LoveMyHonda. think I can get away with a 42 pilot 125 main on a 24mm carb

Limp1144 · Post by **Limp1144** » Sun Mar 02, 2014 10:12 pm

Also does anyone have any pics to dremel out the carb bowl so I can swap the pilot too. thanks

ped · Post by **ped** » Sun Mar 02, 2014 11:24 pm

Limp1144 wrote:Also does anyone have any pics to dremel out the carb bowl so I can swap the pilot too. thanks

Hi limp. remove very little at a time until the pilot come out. try not to touch the drain bolt seat. it may leak. take your time. If you drink too much coffee, try at your own risk.

good luck.

ped · Post by **ped** » Sun Mar 02, 2014 11:52 pm

Limp1144 wrote:Any know where the wiring diagram is for the jdm taillight. I got it all ready to go back together but need the wiring for the tail light thanks.

Roger that LoveMyHonda. think I can get away with a 42 pilot 125 main on a 24mm carb

Hi limp. I don't have one but follow the colors on the wires. use your other scooter as a guide.

Limp1144 · Post by **Limp1144** » Mon Mar 03, 2014 6:44 pm

Look what came in the mail today.
Two Polini Corsa bores.

Wheeeeel Insertssss

I might sell these wheel inserts if anyone wants them two sets for 80 plus shipping.

KingJeff801 · Post by **KingJeff801** » Tue Mar 04, 2014 11:15 pm

Limp1144 wrote:Any know where the wiring diagram is for the jdm taillight.

here you go

http://www.hondaspree.net/phpBB3/viewto ... ght#p80497

Honda Spree and Elite 50 Forums

Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build

Re: Million Dollar Scooter Build