I also read the comment as a word change, not grammar change. That floor board, after sitting on the spree, will be very disfunctional. With that said, I can definitely appreciate a scraper. Any thoughts on an airbag/air shock for the rear?? Someone on total ruckus posted a thread on a $300 rear air ride setup!!motormike wrote:paulpauly7 wrote:that wide floor pan isnt going to allow for any lean into the corners
86 Spree nq50 stretch
Moderator: Moderator
-
- Elite
- Posts: 411
- Joined: Fri Jul 22, 2011 2:04 pm
- Location: Maine
Re: 86 Spree nq50 stretch
-
- Noob
- Posts: 12
- Joined: Mon Mar 10, 2014 7:20 pm
- Location: PA
Re: 86 Spree nq50 stretch
Correction: it's an 83 aero we just picked up, should be fun!
-
- Noob
- Posts: 12
- Joined: Mon Mar 10, 2014 7:20 pm
- Location: PA
Re: 86 Spree nq50 stretch
And in response to the air ride, I have $30 in the entire project so far including the cost of the scooter (free) lol so most likely not trying to drop that kind of money. Will instead probably lose the rear shock and run a solid bar to keep it from scraping too much. Not as nice of a ride as air ride but hey more of a rat scooter anyway so I dont really mind going hard tail. Just built my buddy's suzuki fa50 that way and it rides great.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 86 Spree nq50 stretch
the fa50 is more of a low rider then a rat ... but earthier way its nice ...
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: 86 Spree nq50 stretch
Just a wild idea - footboard could have pivots/latches so the could flip up into a slight 'V' for riding, then drop down when parked for show.And in response to the air ride, I have $30 in the entire project so far including the cost of the scooter (free) lol so most likely not trying to drop that kind of money. Will instead probably lose the rear shock and run a solid bar to keep it from scraping too much.
Here's a Yamaha lowrider I saw in town last summer. It was low enough to make me wonder if they trailer in, and scout a riding route before riding.
-
- Noob
- Posts: 12
- Joined: Mon Mar 10, 2014 7:20 pm
- Location: PA
Re: 86 Spree nq50 stretch
Thanks swimmingfree! We're kind of starting up a little riding group of low rider scooters and peds in my town. Currently there is 5 bikes under the knife in my garage including my spree and the fa50. I'll put some pics of them together when we get the Puch Maxi, Honda Hobbit, and Aero done. This summer should be a blast! And thanks for sharing mouse that Yamaha looks great! Its hard to tell in the picture I posted but my floor pan is actually angled up a few degrees for that reason, very interesting idea with the pivots though and I will definitely put some thought into fabbing something like that up. Penn State is trying to teach me how to be an engineer so maybe ill play around with a design on CAD while im back at school!
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 86 Spree nq50 stretch
heres a photo of my son and the low rider bike we made
swimmingfree
https://imagizer.imageshack.us/v2/580x3 ... unny1a.jpg
swimmingfree
https://imagizer.imageshack.us/v2/580x3 ... unny1a.jpg
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- Elite
- Posts: 411
- Joined: Fri Jul 22, 2011 2:04 pm
- Location: Maine
Re: 86 Spree nq50 stretch
I'd love to see what your doing with the aero. I have a mild stretch build going on now.Cbarnes2186 wrote:. I'll put some pics of them together when we get the Puch Maxi, Honda Hobbit, and Aero done.
-
- Noob
- Posts: 12
- Joined: Mon Mar 10, 2014 7:20 pm
- Location: PA
Re: 86 Spree nq50 stretch
That bike is wild swimmingfree, thanks for sharing! We actually picked up the Aero on Saturday so at the moment we're mostly just in the planning stage. My buddy who owns the bike is 6'6" so the plan is to stretch the center of the frame a good amount to give him some much needed leg room, he looks a little ridiculous on it as it is now lol. After that the plan is to extend the motor mount about 8-10 inches and adjust the front forks accordingly to level it out. As of now were going for a wheel base of right around 70 inches and a ride height of about 3 inches. Here's a pic of the scoot as is:
Unfortunatly it'll be a few weeks before I can get home and get back to work on my Spree and this Aero project. Been messing around with some color schemes though while at school, maybe someone can give me some other ideas. This is what it will hopefully will look like when its done:
Unfortunatly it'll be a few weeks before I can get home and get back to work on my Spree and this Aero project. Been messing around with some color schemes though while at school, maybe someone can give me some other ideas. This is what it will hopefully will look like when its done:
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 86 Spree nq50 stretch
you are the first one on here to stretch out and make low rider out of the scooter so please post the builds and do lots photo even there not hondas ....
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- Noob
- Posts: 5
- Joined: Thu Dec 29, 2016 11:46 am
- Location: Atlanta, GA
Re: 86 Spree nq50 stretch
I know this is an old post but any update to this build??
Re: 86 Spree nq50 stretch
Original poster has not returned to this forum since March 2014...don't look for an update.
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"