My 87 Elite 50 125cc stroker Build..

[Hppowdercoatings]

Greetings:

Best-looking scooter I've seen in a while! Are you clear-coating over the decals, for the Cherry on the Parfait?

But is that a bare-nekkid cooling fan I see? I sure hope your're not running Shroudless!!

Thanks.. Yes Clear coat planned before Final Assembly.. No old shroud was broken, waiting on another one to get here..

[ped]

Hi HP.
looks very nice

[Hppowdercoatings]

Got the New Trail Tech Vapor Stealth Today..
Mounted it in the stock Gauge Location.. I think it turned out pretty good.. Now I just have to wire it up..

[Hppowdercoatings]

Changed up the Exhaust to a side bleed Style. A lot Quieter & no power loss.



Changed the 30mm OKO carb to 28mm OKO , could not get it to run & idle correctly.. Currently Setup 155/50 jetting. Still plan to swap to either a 28mm or 30mm Polini Carb. , they seem to be easier to tune and run Cooler. Running good enough I've started doing some Trans Tuning.
Right now running Polini white Center spring/Green clutch springs & 6x7g rollers , & 9:1 Gears..

This thing is Scary fast , any more then 1/4 throttle and it Turns into a one wheeled Uni- cycle...
Time to swap to some 7:5:1 Gears..

[Hppowdercoatings]

Fixed the front Disc issues. Powder coated wheels Custom gold metallic...Installed a new Polini 28mm carb from G9 , And set of 7.58:1 Gears from Wheelman-111... Now time to get some Seat/Tune Time..

[1man8scoots]

I like the color!

[whitey]

How's your tuning? What temps are you seeing?