Whitey's stroker

1man8scoots · Post by **1man8scoots** » Fri Mar 27, 2015 1:22 pm

Heat cycles with the shrouds off and he'll be ready in a couple hours.

DirtyE · Post by **DirtyE** » Fri Mar 27, 2015 1:33 pm

His elite came much nicer than mine. 1 owner 2001. Motor work and done. Hes lucky enough to have machining friends locally as well. For my big evo 94 I had to send my cases to josh (admin @scooterinvasion) in North Carolina.

Im sure this 129'er is gonna be a beast. My 81 is gonna feel like stock compared to it. But on the bright side, I can hop on his 180cc Gillera Runner and race him with his own bike. I think because of the weight difference the elite is probablygonna beat the runner.

whitey · Post by **whitey** » Mon Mar 30, 2015 10:21 am

It lives! Here is the first start.

1man8scoots · Post by **1man8scoots** » Mon Mar 30, 2015 11:40 am

Pretty sweet. I was poking around at the pb pics you have. Why didn't you match your cylinder and piston to your intake? All that air just hits a wall when it hits that cylinder skirt interfering with the air flow to the other side.

whitey · Post by **whitey** » Mon Mar 30, 2015 12:08 pm

I did address that before the final assembly. I have been editing my process as I go. Look back and see the changes.

1man8scoots · Post by **1man8scoots** » Mon Mar 30, 2015 1:24 pm

Minor details like that makes the revs clean, nice work!

ped · Post by **ped** » Mon Mar 30, 2015 5:17 pm

hi whitey. somehow the video is not working. love to hear it run. :peace:

DirtyE · Post by **DirtyE** » Mon Mar 30, 2015 8:41 pm

I got to see this beast in action today. Its a whopper. Louder than s***! Im jealous.

whitey · Post by **whitey** » Mon Mar 30, 2015 9:31 pm

She sure hauls *. I need some bigger jets but I got to ride over to Mikes, a couple miles probably. It gets hot fast. Feels like my Runner.

Downsouthdio · Post by **Downsouthdio** » Tue Mar 31, 2015 6:37 am

My stroker would get hot fast bro..even with a 33mm..they are race bikes for sure..n not daily drivers

DirtyE · Post by **DirtyE** » Tue Mar 31, 2015 7:48 am

Maybe you could retard ur stator?

EDIT: What plug are you using?

ped · Post by **ped** » Thu Apr 02, 2015 6:05 am

Hi Whitey. I didn't get to see the video. for some reason its not working.
you should be able to pick up a jet at your local MC shop. bring your old one. if they don't have one, drill the one you have. until you can order one.
Harbor Freight sells a pack of very small drill bits.

question, did you cut your piston skirts at all? like in order to let more air in?

1man8scoots · Post by **1man8scoots** » Thu Apr 02, 2015 10:18 am

I've never seen someone realistically ride one as a dd. Are you running avgas mix?

Spooneg6 · Post by **Spooneg6** » Fri Apr 03, 2015 4:27 pm

Can you please pm me what website your purchased this bore? I have a 54 wouldnt mind upgrading to a 56

whitey · Post by **whitey** » Sun Apr 05, 2015 9:32 pm

I installed some 8.44 gears this weekend and got to ride to the beach with DirtyE. The temps are manageable around 330 while putting down the road but they shoot up quick after a short burst. My jetting is on the rich side with a little bogging before acceleration.

Honda Spree and Elite 50 Forums

Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker

Re: Whitey's stroker