Yamaha jog

Mini_Stroker305 · Post by **Mini_Stroker305** » Thu Apr 02, 2015 4:05 pm

rakfint wrote:
Mini_Stroker305 wrote:Nope, 68 mph strong and we can surely prove it
Please come tune mine. Haha

Sorry for Newb questions here. I've got a 93 Jog Motor (50cc) it came with no exhaust so I picked up a random one from craigslist for $40. Bolted up, got noticable gains from the rusty old one I had on prior.

I have a pod air filter with only 1 open end which seems better than the fully open pod I had prior.

I have been playing with needle positions and main jets, best I seem to manage right now is just over 60kmph, which I believe this scoot should manage even stock?

If you are running stock carb, not having stock air box will restrict your speeds. Get one and see how it runs if still a little sluggish adjust rollers to lighter and jet carb. You may need to go bigger or smaller on jets just depends how your bike reacts but most likely it will be an up jet that you need. Start by putting clip back to original position on needle and then work from the beginning. It's just a matter of trial and error from there.

rakfint · Post by **rakfint** » Thu Apr 02, 2015 4:43 pm

Only issue is i can`t run the stock air box even if i wanted to, so im kind of left with jetting & needle position right now. I could change up carb, hack plastics etc to go back to stock air box.

Downsouthdio · Post by **Downsouthdio** » Thu Apr 02, 2015 5:52 pm

If you plan on changing your carb,,then dont worry about it..but you are going to keep stock carb,,trim them plastics man..you wont regret having the correct airbox on

Mini_Stroker305 · Post by **Mini_Stroker305** » Sun Apr 12, 2015 9:12 pm

Just an update...pretty sure I can still get a little more out of her

Mini_Stroker305 · Post by **Mini_Stroker305** » Sun May 03, 2015 8:48 pm

Nice pic of Downsouthdio's Super Dio and my bike

Mini_Stroker305 · Post by **Mini_Stroker305** » Sat May 23, 2015 3:19 pm

Just installed my new Hoca inner rotor kit nice little upgradee

Mini_Stroker305 · Post by **Mini_Stroker305** » Sat May 23, 2015 3:21 pm

Mini_Stroker305 · Post by **Mini_Stroker305** » Sat May 23, 2015 3:23 pm

Mini_Stroker305 · Post by **Mini_Stroker305** » Sat May 23, 2015 3:25 pm

birdman · Post by **birdman** » Tue Sep 01, 2015 6:30 am

Nice pics of two nice bikes. You been my inspiration to do a naked handle bar on my 1990 Jog (after I put a Zuma front end on it of course).
What kind of improvesments did you see from the Hoca inner rotor ignition kit?

1man8scoots · Post by **1man8scoots** » Tue Sep 01, 2015 10:11 am

It's going to rock after I'm done with it! Is the ignition on it? I've still yet to look at the engine.

Mini_Stroker305 · Post by **Mini_Stroker305** » Tue Sep 01, 2015 10:54 am

I took off as much weight as possible for shipping purposes so unfortunately no the ignition is not on it, but I will send it to you if necessary

1man8scoots · Post by **1man8scoots** » Tue Sep 01, 2015 9:59 pm

No need. Just curious to see the hoca in person.

Mini_Stroker305 · Post by **Mini_Stroker305** » Wed Sep 02, 2015 12:49 pm

ahh i see, sorry bro if i would have known i would have sent it as well

jwhood · Post by **jwhood** » Thu Jan 21, 2016 12:00 am

Anybody seen the rattler 110 cylinder direct fit on the 1peqmf engine

Honda Spree and Elite 50 Forums

Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog

Re: Yamaha jog