Thanks Scooter Swap Shop for my build
Moderator: Moderator
Thanks Scooter Swap Shop for my build
Guess I'll make a build thread on my ped. Most, if not all parts bought from Brandon.
Motor specs:
70cc malossi mhr stock port just polished exhaust opening
Mhr full counter crank
Boost port matched
Intake cleaned and slightly opened with lots more room to open
Yasuni c16 pipe
CT black manifold w/stage6 reeds
Polini 24pwk carb w/stage6 angled filter
Polini pulley s type w/s rear drive
Polini evo bell
Polini 15% center w/malossi torsion saver
Stage6 clutch w/malossi black springs rated 6500-9000 stalls
8.44 gears
Still got a few other parts on my check list
Video link:
First tuning session with the yasuni c16
https://youtu.be/RH4MP9yRf1k
As for now, her she is:
Rocking the SSS sticker
Motor specs:
70cc malossi mhr stock port just polished exhaust opening
Mhr full counter crank
Boost port matched
Intake cleaned and slightly opened with lots more room to open
Yasuni c16 pipe
CT black manifold w/stage6 reeds
Polini 24pwk carb w/stage6 angled filter
Polini pulley s type w/s rear drive
Polini evo bell
Polini 15% center w/malossi torsion saver
Stage6 clutch w/malossi black springs rated 6500-9000 stalls
8.44 gears
Still got a few other parts on my check list
Video link:
First tuning session with the yasuni c16
https://youtu.be/RH4MP9yRf1k
As for now, her she is:
Rocking the SSS sticker
Last edited by jetlag on Mon Apr 20, 2015 1:17 pm, edited 5 times in total.
Re: Thanks Scooter Swap Shop for my build
Well get more pix and videos. Just the file is huge and takes for ever to upload. As for the pipe its a screamer so far I'm @69MPH reving low 10k maybe even lower with a dead center spring which couldnt hold the revs and Temps no higher then 310-320
Re: Thanks Scooter Swap Shop for my build
Forgot which main I had at that time but I'm around 118-124 with a fat 50 pilot which got me thinking if I got a leak somewhere. Working with the polini 24pwk with c-clip one up.
Re: Thanks Scooter Swap Shop for my build
Hi jetlag. that's a sweet Sr, doing some nice speed.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: Thanks Scooter Swap Shop for my build
beautiful man!
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: Thanks Scooter Swap Shop for my build
Solid bike!
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
Re: Thanks Scooter Swap Shop for my build
Just finish riding tonight bike turned 15k!!! Idk if that's right, speedo said 66mph but my friend with his supermoto last time he checked he said it was easily passed 70mph with me still pulling away wish I had a GPS on or something accurate. May have to recalibrate vapor tech since I didn't do it with the new tire and the old tire was bald and squared off. Temps still at 329max!!! With air screw backed out 2 1/2 spark plug comes out black. All on a malossi not ported. All I can say is I had fun
Re: Thanks Scooter Swap Shop for my build
Malossi aluminum gears are 8.44. My old setup was this same mhr bore and crank with a scorpion 24 oko carb went 74mph@11,xxx.
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: Thanks Scooter Swap Shop for my build
Mhr port timing would never support 15k, your vapor is not reading correct. Given it does say it hit 15,100 it's pretty cool to see it say that at least.
Sweet ride though!
Sweet ride though!
Re: Thanks Scooter Swap Shop for my build
My vapor on my af05 build showed 12k once I think it was from a bump lol I was turning an average 9-9.5k
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Thanks Scooter Swap Shop for my build
That cover looks so awesome. Can't wait to see it done. I'd almost get one of those covers just to do the same cut job.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock