My 98 Elite SR - disc conversion and more

This is the place to post your scooter builds; everything from stock Spree restoration to water-cooled drag bikes.

Moderator: Moderator

Meloshameless
Elite
Elite
Posts: 392
Joined: Mon Feb 01, 2016 11:04 pm
Location: beaverton, or

Re: My 98 Elite SR

Post by Meloshameless »

Beautiful build, i just got an arrow as well, best looking pipes in my opinion. But what happened to the custom one you were building?
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
Ryan_ott
Spree
Spree
Posts: 101
Joined: Tue Oct 27, 2015 9:29 am
Location: Bucks county, PA
Contact:

Re: My 98 Elite SR

Post by Ryan_ott »

That pipe is done and works great it's just not as cleanly made as the arrow. I needed a pipe to complement the rest of the bike.

I have intentions of inlaying a trail tech vapor in the stock speedo. That's for next weekend the wife has had enough of me in the garage.
I sold it all...

75 Yamaha RD200 project

http://www.49ccscoot.com/
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: My 98 Elite SR - disc conversion and more

Post by Wheelman-111 »

Greetings:

Beautiful job! Are you still rocking the Polini variator with SEF plate? I've never been able to fit anything but a Polini ramp plate on the Polini variators. Those little guides don't seem to fit well and uh... glide, very well. Polini makes ramp plates with different angles, but they all require those three blue plastic guides.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Ryan_ott
Spree
Spree
Posts: 101
Joined: Tue Oct 27, 2015 9:29 am
Location: Bucks county, PA
Contact:

Re: My 98 Elite SR - disc conversion and more

Post by Ryan_ott »

I'm still using that combo but a custom length boss. I get 100% travel on the variator. Using the marker test there is nothing left. I can measure it if you wanted. I think it's a good combo.
I sold it all...

75 Yamaha RD200 project

http://www.49ccscoot.com/
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: My 98 Elite SR - disc conversion and more

Post by Wheelman-111 »

Greetings:

Good to know. Are you using the black SEF guides then?
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Ryan_ott
Spree
Spree
Posts: 101
Joined: Tue Oct 27, 2015 9:29 am
Location: Bucks county, PA
Contact:

Re: My 98 Elite SR - disc conversion and more

Post by Ryan_ott »

I honestly don't remember I'm pretty sure I have the blue Polini in there. I might of had to file them. I need to lighten my weights anyway when I'm in there I'll get you some pics.
I sold it all...

75 Yamaha RD200 project

http://www.49ccscoot.com/
Meloshameless
Elite
Elite
Posts: 392
Joined: Mon Feb 01, 2016 11:04 pm
Location: beaverton, or

Re: My 98 Elite SR - disc conversion and more

Post by Meloshameless »

It looked like the custom pipe would hit the plastics or tail lights with weight on the bike, from the pics, but amazing fab work, wish i had the right welder, or even the talent to build a pipe like that! The arrow sounds alot like my yz 80, loud and proud, it gets alot of attention, lol.
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
User avatar
tazland001
Board Supporter
Board Supporter
Posts: 1333
Joined: Thu Apr 30, 2009 11:46 pm

Re: My 98 Elite SR - disc conversion and more

Post by tazland001 »

omg that looks bad *. It is beautiful !!
Ryan_ott
Spree
Spree
Posts: 101
Joined: Tue Oct 27, 2015 9:29 am
Location: Bucks county, PA
Contact:

Re: My 98 Elite SR - disc conversion and more

Post by Ryan_ott »

Here is that pipe finished up it fit really well. That original pic is before it was completely done. Actually that pipe had more torque then this arrow. Comparison videos

https://youtu.be/g5Yb1hZvVdY Homemade pipe around 25mph it hits great

https://youtu.be/84Hl2GLshsc Quick vid of arrow, seems to have a straight power curve not really a hit.

I'm sure once tuned it will be better. Still looks better then what I made. But I think the specs are a bit off to be perfect.




Image
I sold it all...

75 Yamaha RD200 project

http://www.49ccscoot.com/
Meloshameless
Elite
Elite
Posts: 392
Joined: Mon Feb 01, 2016 11:04 pm
Location: beaverton, or

Re: My 98 Elite SR - disc conversion and more

Post by Meloshameless »

Ive got the same set up, on a new build, corsa, stage 6, and arrow. Was thinking about running 9:1 gears also. Does urs still do wheelies with those gears? If so what roller weight and center contra are u running?
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
eight08boy
Goped
Goped
Posts: 98
Joined: Mon Sep 03, 2007 12:33 am

Re: My 98 Elite SR - disc conversion and more

Post by eight08boy »

How u match the paint lmk
Gjino Kanahele

U asking cherry price u better have cherry s***
Ryan_ott
Spree
Spree
Posts: 101
Joined: Tue Oct 27, 2015 9:29 am
Location: Bucks county, PA
Contact:

Re: My 98 Elite SR - disc conversion and more

Post by Ryan_ott »

I got the paint at colorrite.com.

The front end still goes up easily. I'm running lightened 6.3g they are around 5.8g now I need to lighten them up a bit still.

About the Polini/ sef combo I'm using the black guides. They look like some from a Minarelli scoot. The drive boss is 31mm but I'm using a Minarelli rear pulley and a malossi dio belt.

Image

Image
I sold it all...

75 Yamaha RD200 project

http://www.49ccscoot.com/
Post Reply