Thanks!SpreeorDie85 wrote:Awesome work!
Honda Aero nb50 to nh125 Swap Project
Moderator: Moderator
Re: Honda Aero nb50 to nh125 Swap Project
-
- Elite
- Posts: 392
- Joined: Mon Feb 01, 2016 11:04 pm
- Location: beaverton, or
Re: Honda Aero nb50 to nh125 Swap Project
Lookin good man! Spring scoot is this weekend, u gonna make it out?
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
Re: Honda Aero nb50 to nh125 Swap Project
Thanks! I want to go to spring scoot but I don't think I'm going to make out, looks like rain tomorrow morning but it could clear up in the afternoon and I'll regret not going.Meloshameless wrote:Lookin good man! Spring scoot is this weekend, u gonna make it out?
I went for a quick cruise today with sun out and 55 degrees but still froze my * off while I was doing over 50mph. Good news is that I can hear my stereo while going that fast which some of my coworkers thought I wouldn't be able to hear it while riding.
Re: Honda Aero nb50 to nh125 Swap Project
Your speakers are nice & high, and at a good angle. When the speakers are lower or aimed down they can be hard to hear. Mine are in my glove box and I don't hear em too well when I'm moving.
Re: Honda Aero nb50 to nh125 Swap Project
I bought another parts aero 125 for $100, it's pretty hacked up and has a funny exhaust. I messed around with it enough to hear it fire up 2 seconds, had to jump the ignition switch and put power straight from the battery to the starter. I all ready pulled the engine off, it will be a spare or maybe for another swap someday.
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Honda Aero nb50 to nh125 Swap Project
the cts are notorious for air leaks. unless its the big ct intake. make sure you get those surfaces nice and flat. I had one and after figuring out it was my intake I took it apart and found that every possible place it could leak it did. ended up honda bonding the snot out of it till I got a better intake.
on a side note looking forward to checking this beast and riding sometime.
on a side note looking forward to checking this beast and riding sometime.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: Honda Aero nb50 to nh125 Swap Project
On my CT manifold I used sandpaper and a glass surface. Came out well. I would get a Reed block from a kx65 also- some people have had problems with the CT manifolds Reed cage breaking.
Re: Honda Aero nb50 to nh125 Swap Project
I had to sand the mounting flange on the ct manifold I bought last year, I plan on doing the same on this new one. Also planning on sanding the reed cage flanges on this one, I didn't do that on my last manifold and I suspect it leaked between there even with grey silicone.
Here's a pic of my last intake, stuck a flashlight down the manifold to see light through the gap.
Here's a pic of my last intake, stuck a flashlight down the manifold to see light through the gap.
Re: Honda Aero nb50 to nh125 Swap Project
Yup, sand every mounting surface flat. It definitely needs it.
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: Honda Aero nb50 to nh125 Swap Project
Neat build for sure!
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel