Page 1 of 1

My Wife's 2001 SR

Posted: Fri May 12, 2017 8:31 pm
by Xxbeejay45xx
Hello guys/gals thought I'd share another build with you guys. This is my wife's 2001 Honda Elite SR50 only bolt ons and she does 60-65 mph easily. This one has 72cc polini corsa, 24mm polini carb, polini trans, belt, yasuni pipe, font disc brake, zx wheels, Taiwan headset, Japan rear tail pretty much all the basics. Check it out....


Image

Image

Image

Re: My Wife's 2001 SR

Posted: Fri May 12, 2017 9:25 pm
by Dallen70
looks great

Re: My Wife's 2001 SR

Posted: Sat May 13, 2017 9:32 am
by S4Patrick
Very nice!

Re: My Wife's 2001 SR

Posted: Sat May 13, 2017 1:25 pm
by benji
Cool bike!

Re: My Wife's 2001 SR

Posted: Sat May 13, 2017 6:26 pm
by bonesv
:worship: That is clean AND sweet! I'm sure it's fun for her to ride. I don't see the yasuni pipe. Is it the one from sss? Nice job man! :2thumbs:

Re: My Wife's 2001 SR

Posted: Sun May 14, 2017 5:15 pm
by Xxbeejay45xx
Yes sir most parts are from Scooterswapshop.com I was lucky to purchase this used and I love it.

Re: My Wife's 2001 SR

Posted: Sun May 14, 2017 5:17 pm
by Xxbeejay45xx
Here is the shot from the other side.... hope you like it Mr BonesV

Image


Image

Re: My Wife's 2001 SR

Posted: Sun May 14, 2017 7:22 pm
by bonesv
OH I DO!!! I wish I had gotten one of those pipes when I had a chance! I hear of so much power being made from the design. I wonder if there is a down-side to the Yasuni-for-Dio?

Re: My Wife's 2001 SR

Posted: Sun May 14, 2017 11:00 pm
by eclark5483
Love it.

Re: My Wife's 2001 SR

Posted: Mon May 15, 2017 4:54 pm
by Xxbeejay45xx
Thank you guys!!

Re: My Wife's 2001 SR

Posted: Mon May 15, 2017 5:00 pm
by Xxbeejay45xx
Personally I like the yasuni over the arrow. Easy to tune too, revs really high, not as loud as the arrow, sounds great! uses heavier rollers then the arrow. Down size is it sits low and if you have a stretched and lowered bike I think it will hit pavement on leans towards the right.

Re: My Wife's 2001 SR

Posted: Mon May 15, 2017 5:28 pm
by bonesv
Ahhh, yes. That can be a concern. You did such a nice job on that scooter! I suppose you have a hidden master cylinder? sweeeeeet! :peace:

Re: My Wife's 2001 SR

Posted: Mon May 15, 2017 11:26 pm
by Xxbeejay45xx
Yes sir it does.... Here is a snap and how I did I it. You would need to purschse a breather tube plug from eBay also. The master cylinder comes with a brake fluid reservoir, go ahead and bolt everything up and bleed the brake system. After all said and done with, pull the fluid reservoir off leaving the tube there. I cut the tube shorter to my liking and the fill the tube with fluid and cap the hose with the breather plug, clamp with hose clamps and done! No need for that bulky brake fluid reservoir bouncing around in there. I did this to all my bikes and including my Yamaha R1. But remember to use hose clamps to hold the hose in place.

Image

Here is the Daytona master cylinder I used, here is the link. This is the same one on the Z4 Dio but in black.
https://www.drowsports.com/daytona-niss ... kit-right/

Look at this on eBay:

https://www.ebay.com/itm/282475830099

Honda 17370-419-700 PLUG, BREATHER TUBE

Re: My Wife's 2001 SR

Posted: Mon May 22, 2017 11:34 pm
by lite02
That's a totally neat 2001 SR! Looking to restore this CH80 as well and got some ideas already. Just have to finish installing the Smittybilt parts on current jeep project before I start working on it, as well as on brother's Spree.