Page 1 of 1
Teach an old dog new tricks.
Posted: Wed Dec 27, 2017 3:30 am
by pitobread
....
Re: Teach an old dog new tricks.
Posted: Wed Dec 27, 2017 3:36 am
by pitobread
.....
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Fri Dec 29, 2017 4:15 pm
by sum_azn_kid
Looks awesome. Why did u want to go with the small spline crank?
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Fri Dec 29, 2017 6:14 pm
by pitobread
I didn't, I just had the cases.
I am putting a large crank in there. JiangWayne sells the seals to convert it.
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Fri Dec 29, 2017 8:21 pm
by sum_azn_kid
I'm curious to see how those seals hold up. I have a spare small spline af18e that idk what to do with.
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Sat Dec 30, 2017 3:39 am
by pitobread
Well I guess its more complicated than just seals.
I will need to machine the bearing pockets deeper to use a late model crankshaft. It is not as easy as just seals. KN also makes 11mm wide bearings for this reason but I wanna use C4 bearings and they just look like taiwan bearings.
All in all its probably easier to just to buy another set of later model cases.
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Sat Dec 30, 2017 3:40 am
by pitobread
And in case anyone is wondering, a early small crank web to web thickness is 34mm +/- .1
A late large crank is 36mm
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Sat Dec 30, 2017 2:19 pm
by sum_azn_kid
Wow that much work. Thanks for the heads up. I was gonna just use an af16e case on the trans side, if I build that motor. But In have a big spline af18e to play with.
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Sat Dec 30, 2017 3:29 pm
by pitobread
Well their are either the KN 11mm bearings and jiangwayne seals or bore 1mm each side.
I am going to attempt boring but also have another set of cases on the way as well.
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Sun Dec 31, 2017 10:46 am
by ped
Hi pito. If you machine the bearing Pockets deeper, the bearings make cover the oil fill hole? Or not enough oil flow too bearing?
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Sun Dec 31, 2017 8:56 pm
by pitobread
That may be a possibility, but those holes could be hogged out as well.
Ive got a large cases on the way here so if it doesn't work, Meh.
Re: Teach an old dog new tricks. AF18E Stage6 R/T95 Build.
Posted: Sat Jan 06, 2018 6:48 pm
by pitobread
.....
Teach an old dog new tricks AF18E Stage6 R/T95 Build
Posted: Sat Jul 20, 2019 11:01 pm
by Howardgon
Youve got some skills man.
How do you use the palette without the paint drying in 5 seconds?