Just another AF16 Spree Swap
Moderator: Moderator
Re: Just another AF16 Spree Swap
Some part are here, top end should be here this week.
- Attachments
-
- Part1.jpg (411.12 KiB) Viewed 15076 times
Re: Just another AF16 Spree Swap
So fresh and so clean
- Attachments
-
- Engine1.jpg (328.27 KiB) Viewed 14962 times
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Just another AF16 Spree Swap
Greetings:
A most sanitary and well-executed build, well-done.
Word of Caution: The black cup on that air filter quiets the intake moan but is extremely restrictive in my experience. Well-tuned for an open foam filter, my Fabrizi would barely run when that cap went on. Probably needs 3 or more jet sizes Down, with commensurate decrease in power, if you install it.
A most sanitary and well-executed build, well-done.
Word of Caution: The black cup on that air filter quiets the intake moan but is extremely restrictive in my experience. Well-tuned for an open foam filter, my Fabrizi would barely run when that cap went on. Probably needs 3 or more jet sizes Down, with commensurate decrease in power, if you install it.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Just another AF16 Spree Swap
Will the filter be unrestricted/plenty of air if I take the cover off?
Dry fitting parts.
Dry fitting parts.
- Attachments
-
- Fitting1.jpg (279.74 KiB) Viewed 14952 times
Re: Just another AF16 Spree Swap
Sorry, I cant figure out this attachment thing
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Just another AF16 Spree Swap
Greetings:
If it's like the filter I had, there should be a foam cylinder under the cap - like a UNI. In that case there's almost no restriction - AND no sound dampening. The roar from the left side can compete with the exhaust racket.
If it's like the filter I had, there should be a foam cylinder under the cap - like a UNI. In that case there's almost no restriction - AND no sound dampening. The roar from the left side can compete with the exhaust racket.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Just another AF16 Spree Swap
Rear wheel prox sensor mount for the vapor.
- Attachments
-
- Prox Mount2.jpg (251.77 KiB) Viewed 14916 times
-
- Prox Mount.jpg (293.42 KiB) Viewed 14916 times
-
- Prox Mount1.jpg (223.29 KiB) Viewed 14918 times
Re: Just another AF16 Spree Swap
Clean and simple.
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Re: Just another AF16 Spree Swap
4 heat cycles in, might take it for a ride tomorrow. Next step in a met front stem, wheels and a disc setup.
- Attachments
-
- Spree1.jpg (312.93 KiB) Viewed 14903 times
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: Just another AF16 Spree Swap
That thing is just unbelievably sweet looking. Do you plan on doing any VHT paint on the pipe?
Re: Just another AF16 Spree Swap
I've heard mop n glo floor wax works great too
Re: Just another AF16 Spree Swap
I am not planing on painting the pipe, it looks to be clear coated from the factory. If it starts looking rusty I might re-coat it.
Re: Just another AF16 Spree Swap
It turns brown after a few rides. Gives it a nice cooked look. ![lol :lol:](./images/smilies/lol.gif)
![lol :lol:](./images/smilies/lol.gif)
I need to find some new haters...the ones I have are starting to like me.
Re: Just another AF16 Spree Swap
It has been some time but I am still working on the spree. I did get to take it for a short ride up and down the street but am still in the breaking in process.
Without many projects this winter I decided to continue working on the spree. Next step is/was larger wheels with a nice tires and a front rotor brake. I ended up going with a metro stem and NCY wheels with 90/90 S1’s. The rest still needs to get on order but this is where I am at. Big thanks to the Scooter Swap Shop for great info and helping with tons of questions.
Without many projects this winter I decided to continue working on the spree. Next step is/was larger wheels with a nice tires and a front rotor brake. I ended up going with a metro stem and NCY wheels with 90/90 S1’s. The rest still needs to get on order but this is where I am at. Big thanks to the Scooter Swap Shop for great info and helping with tons of questions.