Just another AF16 Spree Swap

This is the place to post your scooter builds; everything from stock Spree restoration to water-cooled drag bikes.

Moderator: Moderator

ntonar
Goped
Goped
Posts: 84
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Just another AF16 Spree Swap

Post by ntonar » Mon Dec 03, 2018 9:06 pm

Some part are here, top end should be here this week.
Attachments
Part1.jpg
Part1.jpg (411.12 KiB) Viewed 1022 times

ntonar
Goped
Goped
Posts: 84
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Just another AF16 Spree Swap

Post by ntonar » Thu Dec 06, 2018 7:24 pm

So fresh and so clean
Attachments
Engine1.jpg
Engine1.jpg (328.27 KiB) Viewed 908 times

User avatar
Wheelman-111
Moderator
Moderator
Posts: 10993
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: Just another AF16 Spree Swap

Post by Wheelman-111 » Thu Dec 06, 2018 7:47 pm

Greetings:

A most sanitary and well-executed build, well-done.
Word of Caution: The black cup on that air filter quiets the intake moan but is extremely restrictive in my experience. Well-tuned for an open foam filter, my Fabrizi would barely run when that cap went on. Probably needs 3 or more jet sizes Down, with commensurate decrease in power, if you install it.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
Still Seeking Red PCX-150
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox, Carb and Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 99KPH

:coolcruise:

ntonar
Goped
Goped
Posts: 84
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Just another AF16 Spree Swap

Post by ntonar » Sat Dec 08, 2018 8:56 pm

Will the filter be unrestricted/plenty of air if I take the cover off?

Dry fitting parts.
The attachment Fitting1.jpg is no longer available
Attachments
Fitting1.jpg
Fitting1.jpg (279.74 KiB) Viewed 898 times

ntonar
Goped
Goped
Posts: 84
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Just another AF16 Spree Swap

Post by ntonar » Sat Dec 08, 2018 8:58 pm

Sorry, I cant figure out this attachment thing
Fitting2.jpg
Fitting2.jpg (295.47 KiB) Viewed 898 times

User avatar
Wheelman-111
Moderator
Moderator
Posts: 10993
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: Just another AF16 Spree Swap

Post by Wheelman-111 » Mon Dec 10, 2018 5:22 pm

Greetings:

If it's like the filter I had, there should be a foam cylinder under the cap - like a UNI. In that case there's almost no restriction - AND no sound dampening. The roar from the left side can compete with the exhaust racket.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
Still Seeking Red PCX-150
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox, Carb and Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 99KPH

:coolcruise:

ntonar
Goped
Goped
Posts: 84
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Just another AF16 Spree Swap

Post by ntonar » Wed Dec 12, 2018 2:16 pm

Rear wheel prox sensor mount for the vapor.
Attachments
Prox Mount2.jpg
Prox Mount2.jpg (251.77 KiB) Viewed 862 times
Prox Mount.jpg
Prox Mount.jpg (293.42 KiB) Viewed 862 times
Prox Mount1.jpg
Prox Mount1.jpg (223.29 KiB) Viewed 864 times

User avatar
bonesv
Moderator
Moderator
Posts: 1666
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: Just another AF16 Spree Swap

Post by bonesv » Wed Dec 12, 2018 6:42 pm

Clean and simple.
Honda Elite SR
Honda Dio-Elite SR
Honda Elite LX
Pineapplegti wrote:Ruckus mods should never carry over to vintage scooters......it just isn't kosher.

ntonar
Goped
Goped
Posts: 84
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Just another AF16 Spree Swap

Post by ntonar » Sat Dec 15, 2018 12:03 am

4 heat cycles in, might take it for a ride tomorrow. Next step in a met front stem, wheels and a disc setup.
Attachments
Spree1.jpg
Spree1.jpg (312.93 KiB) Viewed 849 times

User avatar
eclark5483
CB900F
CB900F
Posts: 1303
Joined: Thu Apr 14, 2016 5:15 am
Location: Spencer Iowa
Contact:

Re: Just another AF16 Spree Swap

Post by eclark5483 » Sat Dec 15, 2018 1:08 am

That thing is just unbelievably sweet looking. Do you plan on doing any VHT paint on the pipe?
Indian Motorcycle tech @ Polaris Industries, B.A. Information Technology, A.A. Engineering
3 Sprees
1 ATM50-A1
1 Indian AMI-50
World's Greatest Spree: https://www.youtube.com/watch?v=lU49lL_Xx4s
Want to make a Spree engine go fast? CLICK HERE: LINK

User avatar
benji
CB900F
CB900F
Posts: 1709
Joined: Mon Aug 10, 2015 9:15 pm
Location: renton,wa

Re: Just another AF16 Spree Swap

Post by benji » Sat Dec 15, 2018 9:11 pm

I've heard mop n glo floor wax works great too

ntonar
Goped
Goped
Posts: 84
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Just another AF16 Spree Swap

Post by ntonar » Mon Dec 17, 2018 10:56 am

I am not planing on painting the pipe, it looks to be clear coated from the factory. If it starts looking rusty I might re-coat it.

User avatar
Meatball
CB900F
CB900F
Posts: 1797
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: Just another AF16 Spree Swap

Post by Meatball » Mon Dec 17, 2018 11:21 pm

It turns brown after a few rides. Gives it a nice cooked look. :lol:
I need to find some new haters...the ones I have are starting to like me.

ntonar
Goped
Goped
Posts: 84
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Just another AF16 Spree Swap

Post by ntonar » Fri Jan 11, 2019 9:51 pm

It has been some time but I am still working on the spree. I did get to take it for a short ride up and down the street but am still in the breaking in process.

Without many projects this winter I decided to continue working on the spree. Next step is/was larger wheels with a nice tires and a front rotor brake. I ended up going with a metro stem and NCY wheels with 90/90 S1’s. The rest still needs to get on order but this is where I am at. Big thanks to the Scooter Swap Shop for great info and helping with tons of questions.
thumbnail_image1.jpg
thumbnail_image1.jpg (480.81 KiB) Viewed 595 times

ntonar
Goped
Goped
Posts: 84
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Just another AF16 Spree Swap

Post by ntonar » Fri Jan 11, 2019 9:59 pm

thumbnail_image3.jpg
thumbnail_image3.jpg (286.25 KiB) Viewed 594 times
thumbnail_image2.jpg
thumbnail_image2.jpg (310.42 KiB) Viewed 594 times
Attachments
thumbnail_image2.jpg
thumbnail_image2.jpg (310.42 KiB) Viewed 594 times

Post Reply