Yesterday I picked up this Elite. I've been itching to get back into the 2t scooter game. I spent the last few years building old petal mopeds. Mainly a Honda Hobbit and a few Puch's. I can share pics if anybody is interested.
Anyways I picked up this scooter. The body is trashed. Told it needed carb work. It runs and drives but seems to run out of gas at full throttle. Runs great at idle thru mid throttle. I took the main jet out and its got an #89. From what I read it should have a 78. I took the carb completely apart and cleaned/blowed it with compressed air. Float height looks good. I opened up the plugged second air hole in the airbox and took the plate off the variator. (also put a wanted ad in the other section for 80 jet) I'm not entirely sure its the stock carb. PA35kanl
Anybody have an idea of anything else that can be causing my problem? Fuel flow is awesome into the carb. I think its just way rich at WOT.
![Image](http://i1263.photobucket.com/albums/ii628/laplantebd/Motorcycles%20Scooters/20150321_103731_zpsag01d2tp.jpg)