Fab Flash 7: Fabrizi 50mm Cylinder Kit (74.6MPH)

This is the place to discuss your build with other builders and solicit feedback and help with parts of your build: engine, body work, bolt ons, etc.

Moderator: Moderator

User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: Fab Flash 7: Fabrizi 50mm Cylinder Kit (74.6MPH)

Post by ped »

bonesv wrote:
ped wrote:Hi wheelman. Now with the reflex it's smooth sailing. :smile:
you did everything possible for flash.
now that flash is being castrated for a good cause. lol respectfully.
you can keep the oil pump. tie it open on full, put a 92 jet in stock carb. no premix required. Have Wheelperson keep an eye on temp. I don't see any issues. I've been driving one like that for years. gas and go.
:peace:
Sorry to just jump in here, but did you imply that you are running a corsa and arrow pipe with a stock carb and oil pump, with no pre-mix? For how long? I am going by your signature also......
Hi bonesv. no not my spree. my 94 elite SR.
Polini Corsa, 9to1 gears, stock SR pipe(no washer), stock carb 92 jet, stock oil pump tide on full. 50 mph, 55 top speed downwind.
because I own another scooter I only get to put about a thousand miles a year for the last 5 years no issues or problems.
hope this helps someone.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
User avatar
bonesv
Moderator
Moderator
Posts: 2130
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: Fab Flash 7: Fabrizi 50mm Cylinder Kit (74.6MPH)

Post by bonesv »

Oh, with a stock pipe..... That's just a little risky for me. I run a malossi cast iron, NEW SR oil pump, and yms pipe, and still use 1.5 oz. oil added per tank.
Ped, do you have a pod filter on it? or stock airbox?
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: Fab Flash 7: Fabrizi 50mm Cylinder Kit (74.6MPH)

Post by ped »

bonesv wrote:Oh, with a stock pipe..... That's just a little risky for me. I run a malossi cast iron, NEW SR oil pump, and yms pipe, and still use 1.5 oz. oil added per tank.
Ped, do you have a pod filter on it? or stock airbox?
I run a stock air box with both port holes open.
I must admit occasionally I drop a ounce of oil in a tank.
Polini makes a good cylinder.

hope this helps wheelman. go with the Polini. :thumbwink:
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Post Reply