polini manifold and carb test.

curtis966 · Post by **curtis966** » Tue Aug 05, 2014 6:36 am

How much are these manifolds?

patthesoundguy · Post by **patthesoundguy** » Tue Aug 05, 2014 9:27 am

When you say adapter do you mean spree block adapter to fit the manifold on to the spree block?

dres0081 · Post by **dres0081** » Wed Aug 06, 2014 3:49 am

just picked up and running this carb on my elite/dio (corsa, naruku manifold polini 23mm carb and polini filter with stock pipe) still playing around with jetting but think I've found a good spot at 128 MJ with 40PJ thing really rips and keeps the temps low around 260, looks great and remote choke is nice mounted mine up on my rear rack. I was switching over from stock carb so no experience with OKO only problem I had was not a lot of tuning info on here yet but graphite9 is always helpful and glad to see he is testing one.

paulpauly7 · Post by **paulpauly7** » Wed Aug 06, 2014 6:23 am

id down jet a little 260 f is rich you want around 320 f to 370 f

gperspective · Post by **gperspective** » Wed Oct 22, 2014 3:44 am

bump

any updates g9?

Rip_City_Spree · Post by **Rip_City_Spree** » Wed Oct 22, 2014 7:38 pm

I honestly don't think there is much MPG difference from my stock to my 24mm polini. Granted I still haven't really run the * out of it yet. I know it had to have dropped some but haven't noticed a huge drop. I love the carb though G9 did show me A better polini carb the other day and it's nice!

Dakine · Post by **Dakine** » Wed Oct 22, 2014 11:23 pm

So throttle response,fuel consumption, and transitioning are alot better with those polini carbs.. In the end how was the top end effected going to a lower MM carb? The end combo you where using was a dio/ct manifold? and the Polini carb?

One of the best manifolds that I liked using was the Koso Small manifold that I had a few years ago. Plus it leaned straight back then at an angle so I could even run Full spree pannels before I put on my eve pannels.

jetlag · Post by **jetlag** » Tue Jan 20, 2015 6:20 am

if you still got this manifold ill buy it from you

birdman · Post by **birdman** » Tue Jan 20, 2015 10:56 am

Very tempted to try one of these on my vertical Jog. I would think a 19 is in order for my set up. I can use my existing intake and throttle cable that accomodates my OKO? OKO jets too right?

jetlag · Post by **jetlag** » Tue Jan 20, 2015 5:35 pm

Just had a few questions on this manifold. Can I use a 24mm pwk style carb on this? What's the diameter of the inlet? And is the reed cage simallar to a ct cage?

deuce217 · Post by **deuce217** » Tue Jan 20, 2015 11:31 pm

Graphite, as soon as my CNC mill project is done I am buying some polini carbs from you.

Xxbeejay45xx · Post by **Xxbeejay45xx** » Thu Jan 22, 2015 8:00 am

Saving money for a polini carb setup!! Gotta trust the reviews!!

jetlag · Post by **jetlag** » Mon Jan 26, 2015 5:03 am

Just curious. Have you ever compaired oko and polini pwk verison of the same size?

dres0081 · Post by **dres0081** » Wed Apr 29, 2015 12:37 pm

hey graphite9 or anyone running polini 23 carb

Im just starting to work on tuning again on my elite

was running 128 Main and 40 pilot top notch on needle, ran strong but rich could only hit 260 degrees at wot

switched to 110 main (smallest i had) 40 pilot middle notch on needle, has a little hesitation at about 1/4 throttle but runs strong after that still barely touching 300 degrees wot

wondering what everyone else is running so i can get a baseline and also what you are doing for setting on the fuel screw and needle clip

Rip_City_Spree · Post by **Rip_City_Spree** » Wed Apr 29, 2015 1:37 pm

im runninng a 24 and currently running a 104 main and 35 pilot. I will probably jump up to a 106 here soon as my temps get up around 370 going up long hills. get a jet kits from G9 for main and pilot worth it to have around.

Honda Spree and Elite 50 Forums

polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.

Re: polini manifold and carb test.