New project bike !!

[Mini_Stroker305]

Hello, my buddy downsouthdio has an elite SR build going on that I'm giving him a hand with. We swapped the elite motor with a kymco zx-50 motor and the build plans are the following:


50mm Bore
28mm Carb
Ct Mani
Pg long


Here are some pics of the build so far just with motor swap not parts yet installed

[birdman]

Sweet! Man you guys are active down there!

[Mini_Stroker305]

Haha thanks b-man building bikes is deffinitely something we love to do down here. Not many people are into what we do though there's only a hand full that are really into it like my buddies and I. But I will keep posting updates on this build as we go so stay tuned

[1man8scoots]

The Kymco block is fun, moped hospital by you guys use to make custom cut gears for the zx50/sc10as gear box.
My only problem with using them is how far back it sits the rear shock, especially if you have an extended engine mount. I had to use a g9 shock mount, weld in a g9 upper shock mount, and space it outboard a bit.
Here's my spree with one of the 5 shocks I tried out...

[1man8scoots]

Use the Kymco zx50 fuel cell on the elite, it's a little bigger and fits.

[Downsouthdio]

Wow that spreezee is bad !!! Thanks for the info, guess ill be swapping tanks Is that a fabrizi pipe?

[1man8scoots]

I never do it anymore but the Kymco zx50 intake is different too, it's a little more direct flow onto the reed block. Do you have a 50mm kit yet? If not let me try to find my old one I used on the zx50 and send it to you.

[1man8scoots]

I found the piston so far. If I don't find the rest I'll send you the piston at least so you have a spare. I'm sure the cylinder and head are just sitting in a box somewhere.