50x50 98cc stroker build

This is the place to discuss your build with other builders and solicit feedback and help with parts of your build: engine, body work, bolt ons, etc.

Moderator: Moderator

User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

hi forum.
still tuning, but took the spreedio for a 22 mile ride.
this motor is fast! plenty of power, at half throttle it just takes off. :smile:
I was riding with a friend that has a 90 cc ruckus clone. and I know it goes over 60 mph. on the open road I left him a mile behind. Lol. he was surprised, so was I. :shock:
tuning takes time which I don't have much of. But I'm very close to getting it perfectly tuned.
I may post some videos? or maybe GPS top speed. will keep you posted.
:peace:
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
xxgamerxx
Noob
Noob
Posts: 13
Joined: Tue Feb 28, 2012 8:52 pm
Location: guimba nueva ecija philippines

Re: 50x50 98cc stroker build

Post by xxgamerxx »

bro wat tops know! im also excited on my 98cc stroker!
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

xxgamerxx wrote:bro wat tops know! im also excited on my 98cc stroker!
Hi.I still have to take it easy, Plus not too many places to do a high speed test. I did get a chance to open it up on a straight Road I did not have the GPS with me if I were to guess I only went about 65 mph. still tuning to get it to 70 +. :smile:
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
xxgamerxx
Noob
Noob
Posts: 13
Joined: Tue Feb 28, 2012 8:52 pm
Location: guimba nueva ecija philippines

Re: 50x50 98cc stroker build

Post by xxgamerxx »

bro any update im getting excited on ur project :)
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

Hi forum.
I have a motor noise on 50mm. :surprise: i don't know if it's piston slap or what? noise is like a tick. :x please check video noise starts at 14 sec.
https://www.youtube.com/watch?v=aRiS1CbVTmE

The compression is around 220psi. I'm also using 100 octane racing fuel. Squish it is at 1.2
I did remove the head to check the piston and the bore everything looks good. No dents or scratches. Motor has about 150 miles.
The motor runs great, and has power. 65+mph.
any advice would be greatly appreciated. :thumbwink:
Attachments
20160517_202354.jpg
20160517_202354.jpg (140.06 KiB) Viewed 7397 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: 50x50 98cc stroker build

Post by Wheelman-111 »

Greetings:

Yikes!! That works out to 15:1 compression ratio. This is in Diesel territory (14 to 22:1). Unlike Herr Diesel's engines however, the top-end bearing may not be up to the task of supporting that level of compression for very long. I'd suspect a little slop has developed in the little end, maybe the crank end as well. This can be checked and compared to FSM specs.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

Thanks Wheelman.
I did a search before posting and came up with ring wear, piston slap. all were associated with high mileage . I'm still confused because I have low miles.
I took it apart and everything looks good. Everything seems very tight.
My best guess would be Rings did not seat properly?

I'll take care of that compression right away.
When all else fails use a repair manual. :lol: thanks Wheelman. I need to know those specs :smile:
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

Thank you Mr G. Definitely changing out the piston and rings.
I believe, I didn't do the "important" proper heat cycling and breakin. :sad:
It's not good to be in a rush. to see how fast it will go. Proper braking will save your cylinder or piston.
:peace:
Attachments
20160519_203544.jpg
20160519_203544.jpg (146.41 KiB) Viewed 7368 times
Last edited by ped on Fri May 20, 2016 1:55 am, edited 2 times in total.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

I'm going to quote someone in the Forum.
"Out with the old In with the new sister wife" LMAO. :bowrofl:
I mean out with the old OKO in with the new polini. :geekdance: from scooter Swap Shop. :thumbwink:
After proper brakin :coolcruise:
Attachments
20160519_205038.jpg
20160519_205038.jpg (144.55 KiB) Viewed 7367 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

Hi forum.
Turned out the motor noise, was it had waaay too much compression.
motor runs really good. it does get a little hot at wot.
I'm working on the Jetting 122 m, 40p, 24oko.
Attachments
20160814_115830.jpg
20160814_115830.jpg (196.99 KiB) Viewed 7273 times
20160814_115823.jpg
20160814_115823.jpg (180.9 KiB) Viewed 7273 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

hi forum. Top speed so far. :geekdance:
I have to change out the 24mm oko carb, and put in the 26mm polini carb from scooter swap shop. :geekdance:
Attachments
20160814_115753.jpg
20160814_115753.jpg (139.23 KiB) Viewed 7259 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
z50 chopper
Goped
Goped
Posts: 54
Joined: Wed Aug 03, 2016 12:57 am
Location: Lethbridge Alberta Canada

Re: 50x50 98cc stroker build

Post by z50 chopper »

:geekdance: pictures :geekdance: :blah: words :blah:

very clear photos and great build by the looks of it.
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

graphite9 wrote:nice work ped! that thing has to be a beast to ride.
Thanks mr. G. It's actually a smooth ride, but it's also very fast. :naughty:
Attachments
20160819_203940.jpg
20160819_203940.jpg (182.08 KiB) Viewed 7275 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
User avatar
ped
CB900F
CB900F
Posts: 1783
Joined: Sun Sep 29, 2013 9:54 pm
Location: northeast usa

Re: 50x50 98cc stroker build

Post by ped »

z50 chopper wrote::geekdance: pictures :geekdance: :blah: words :blah:

very clear photos and great build by the looks of it.
Thanks z50. This is my first Stroker build. it took a while to put it all together, but I'm happy with the results. :smile: here's my top speed so far. :thumbwink:
Attachments
20160819_193507.jpg
20160819_193507.jpg (193.77 KiB) Viewed 7275 times
20160814_115716.jpg
20160814_115716.jpg (142.18 KiB) Viewed 7275 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Re: 50x50 98cc stroker build

Post by MrJumps »

75mph, can you hokd that for a long while say 20 minute comute?
1993 ch80, swapped with a ch250
2021 DRZ400sm :worship:
Post Reply