Page 1 of 5
50x50 98cc stroker build
Posted: Thu Apr 02, 2015 7:31 am
by ped
Hi forum.
I'm putting together a 50mm stroke x 50mm bore = 98cc stroker af16 motor for the summer.
A daily driver.
Most all the parts are Taiwan.
hope you enjoy the photos.
this is my first stroker motor build. it's going to be fun.
PG 50mm BBK
PG 50mm Crank
Honda bearings & seals
OKO 24mm Carb
Ct Mani
Polini for ruckus variator
Malossi ZX Belt
ZX drive pulley
V8 Pipe
Blue butt plug (aka oil plug) lol
8.4 or 7.5 gears (choice)
Re: 50x50 98cc stroker build
Posted: Thu Apr 02, 2015 7:32 am
by ped
PG Phongeer 50mm crank.
Re: 50x50 98cc stroker build
Posted: Thu Apr 02, 2015 7:32 am
by ped
Re: 50x50 98cc stroker build
Posted: Thu Apr 02, 2015 7:32 am
by ped
Re: 50x50 98cc stroker build
Posted: Thu Apr 02, 2015 7:33 am
by ped
Re: 50x50 98cc stroker build
Posted: Thu Apr 02, 2015 10:15 am
by 1man8scoots
Sweet! Chamfer those ports real good. Going to be exciting!
Re: 50x50 98cc stroker build
Posted: Thu Apr 02, 2015 2:08 pm
by Downsouthdio
Sweet setup man,,what kind of crank? Kinda hard to find the 50mm cranks these days..this could be a dd stroker!!
Re: 50x50 98cc stroker build
Posted: Thu Apr 02, 2015 9:58 pm
by Mini_Stroker305
Re: 50x50 98cc stroker build
Posted: Fri Apr 03, 2015 3:33 am
by ped
Re: 50x50 98cc stroker build
Posted: Fri Apr 03, 2015 3:33 am
by ped
Re: 50x50 98cc stroker build
Posted: Fri Apr 03, 2015 3:58 am
by ped
Re: 50x50 98cc stroker build
Posted: Fri Apr 03, 2015 10:51 am
by 1man8scoots
Hi ped, I don't recommend you to leave the crank sitting on its side with only one arm supported by the case. I also don't recommend leaving them sit on a table. It's what happened to the malossi crank I gave you.
Did you have to bore your crank area to fit the 50mm or is it the one that just barely fits?
Re: 50x50 98cc stroker build
Posted: Fri Apr 03, 2015 4:06 pm
by ped
1man8scoots wrote:Hi ped, I don't recommend you to leave the crank sitting on its side with only one arm supported by the case. I also don't recommend leaving them sit on a table. It's what happened to the malossi crank I gave you.
Did you have to bore your crank area to fit the 50mm or is it the one that just barely fits?
Hey 1man8scoots. thanks for the advice, and thanks for the crank. I had it fixed, but it never really came out right. they told me to bring it back.
I have something for you.
I had to bore out the crank area to fit the 50 mm.
Re: 50x50 98cc stroker build
Posted: Fri Apr 03, 2015 4:26 pm
by ped
graphite9 wrote:wow ped, really nice work. Nice clean clear pictures, and your window portwork looks perfect. Kudos.
What mani are you going to run? Hoping to have my 114cc finished up soon.
Mr. G. I'm going with a ct.
I'm going to make it a affordable build.
Re: 50x50 98cc stroker build
Posted: Fri Apr 03, 2015 8:44 pm
by swimmingfree
hay ped sweet little build you got going there guy...
swimmingfree