New member! Honda elite S, seeking more speed

This is the place to discuss your build with other builders and solicit feedback and help with parts of your build: engine, body work, bolt ons, etc.

Moderator: Moderator

Cmoped9
Spree
Spree
Posts: 117
Joined: Fri Mar 27, 2015 10:13 am
Location: Wisconsin

Re: New member! Honda elite S, seeking more speed

Post by Cmoped9 »

I need to try that, when cold it doesn't have a problem, it's only once it warms up fully it loses power. I've gotta figure it out somehow but it must be an air leak, is there any common point for them to leak? Crank seals?
2000 Elite SR
Malossi Cast, 24mm Polini (36/110), 9.8 gears, Naraku intake, PG long exhaust, 6k yellow Polini clutch springs, 5g roller weights. Top speed: 60mph
Cmoped9
Spree
Spree
Posts: 117
Joined: Fri Mar 27, 2015 10:13 am
Location: Wisconsin

Re: New member! Honda elite S, seeking more speed

Post by Cmoped9 »

So I tried checking for any leaks, that test was negative, no changes anywhere, don't believe there is an air leak, it really is having a problem with power once it's warmed up, loses like half the power. I'm unsure what it is, plug is pretty lean looking, and I'm running an 87, which is much larger than most guys put in their de restricted stock scoots. So I'm stumped. Any possible suggestions would be great. Thanks.
2000 Elite SR
Malossi Cast, 24mm Polini (36/110), 9.8 gears, Naraku intake, PG long exhaust, 6k yellow Polini clutch springs, 5g roller weights. Top speed: 60mph
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: New member! Honda elite S, seeking more speed

Post by Wheelman-111 »

Greetings:

87 Main is too big. Runs great cold, but turns rich and kills power when it warms up. Transmission changes won't fix the power loss. Put in a 78 or 82 and test. Where did you even find an 87?
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Cmoped9
Spree
Spree
Posts: 117
Joined: Fri Mar 27, 2015 10:13 am
Location: Wisconsin

Re: New member! Honda elite S, seeking more speed

Post by Cmoped9 »

I thought it was too rich, everyone told me that, but if it's too rich why is my plug turning white? Shouldn't it be black? That's why I'm confused, it makes sense running good when cold, like a choke is on, more fuel, runs good, then it's too rich, and it lacks power, too lean normally pings and can make more power (till it blows) so I'm unsure, the plug bein white is why I thought lean.
2000 Elite SR
Malossi Cast, 24mm Polini (36/110), 9.8 gears, Naraku intake, PG long exhaust, 6k yellow Polini clutch springs, 5g roller weights. Top speed: 60mph
Cmoped9
Spree
Spree
Posts: 117
Joined: Fri Mar 27, 2015 10:13 am
Location: Wisconsin

Re: New member! Honda elite S, seeking more speed

Post by Cmoped9 »

I posted a picture of the plug, it's on the page before.
2000 Elite SR
Malossi Cast, 24mm Polini (36/110), 9.8 gears, Naraku intake, PG long exhaust, 6k yellow Polini clutch springs, 5g roller weights. Top speed: 60mph
Post Reply