87 SE50 "Elite S" project..piece by piece
Moderator: Moderator
Re: 87 SE50 "Elite S" project..piece by piece
This weather has been stalling my progress but Ive been able to tinker a bit. Jetting is trickier than I thought it would be. Still not right on pilot, Im sure of it. Got a box of plugs to play with now. Should help.
- Attachments
-
- plugs.JPG (106.83 KiB) Viewed 4475 times
I need to find some new haters...the ones I have are starting to like me.
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: 87 SE50 "Elite S" project..piece by piece
I once had what I thought was a rich issue for quite a while and it turned out to be lean. But acted the same way as if it was rich. Not sure what your running or what just throwing my two cents in. Way to far out on the screw set it to spec like Melo suggests and go from there.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: 87 SE50 "Elite S" project..piece by piece
Exactly what Im thinking. Temps stay pretty low so I kept thinking rich. Could just be uber lean. Just like a rich bog. theres also a lean bog. Gonna play with it more.Rip_City_Spree wrote:I once had what I thought was a rich issue for quite a while and it turned out to be lean. But acted the same way as if it was rich.
I need to find some new haters...the ones I have are starting to like me.
-
- Board Supporter
- Posts: 772
- Joined: Fri Feb 28, 2014 6:35 am
- Location: Tennessee
Re: 87 SE50 "Elite S" project..piece by piece
Must be the time year....I got about the exact same thing going on with a spree. Starting from ground zero again tonight. No thread jacking here...just empathizing.
Re: 87 SE50 "Elite S" project..piece by piece
Tuning is very hard to get dailed in the northwest right now because of the weather. It gets much easier when it gets above 60 degrees
Re: 87 SE50 "Elite S" project..piece by piece
With the way our weather is....that'll be around June!Gearhart wrote: It gets much easier when it gets above 60 degrees
I need to find some new haters...the ones I have are starting to like me.