Spreedio Performance ... AF16 BUILD

This is the place to discuss your build with other builders and solicit feedback and help with parts of your build: engine, body work, bolt ons, etc.

Moderator: Moderator

User avatar
Xxbeejay45xx
Elite
Elite
Posts: 420
Joined: Thu Jun 19, 2014 7:13 pm
Location: Kansas

Re: Spreedio Performance ... AF16 BUILD

Post by Xxbeejay45xx »

Nice job it's coming along
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
User avatar
jakubman1
Elite
Elite
Posts: 608
Joined: Sat Oct 24, 2015 9:33 am
Location: Tampa

Re: Spreedio Performance ... AF16 BUILD

Post by jakubman1 »

112 Is way to lean my plug is white af!
Temps were 340.
User avatar
jakubman1
Elite
Elite
Posts: 608
Joined: Sat Oct 24, 2015 9:33 am
Location: Tampa

Re: Spreedio Performance ... AF16 BUILD

Post by jakubman1 »

Cleaned my stage 6 filter 1 time and the glue is already starting to come undone. I used FAB1. :*:
Attachments
20170402_191429.jpg
20170402_191429.jpg (87.15 KiB) Viewed 10565 times
User avatar
benji
CB900F
CB900F
Posts: 1708
Joined: Mon Aug 10, 2015 9:15 pm
Location: renton,wa

Re: Spreedio Performance ... AF16 BUILD

Post by benji »

I've been figuring out that stage6 quality is crap.
User avatar
jakubman1
Elite
Elite
Posts: 608
Joined: Sat Oct 24, 2015 9:33 am
Location: Tampa

Re: Spreedio Performance ... AF16 BUILD

Post by jakubman1 »

I do also have the polini filter buuut. should i leave the plastic cone on it? My rear tire kicks up all the dirt on the tage 6 filter
User avatar
benji
CB900F
CB900F
Posts: 1708
Joined: Mon Aug 10, 2015 9:15 pm
Location: renton,wa

Re: Spreedio Performance ... AF16 BUILD

Post by benji »

Yah leave the guard on it or use the oem box. My foam filter is a liability in the rain.
User avatar
jakubman1
Elite
Elite
Posts: 608
Joined: Sat Oct 24, 2015 9:33 am
Location: Tampa

Re: Spreedio Performance ... AF16 BUILD

Post by jakubman1 »

Anyone got port degrees for the contessa?

Is that even the term ?
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: Spreedio Performance ... AF16 BUILD

Post by Wheelman-111 »

Greetings:

I ran that Polini filter, briefly, on one of the Flashes. maybe the 90cc mini-stroker. I can tell you that snapping that rain cover over the foam filter caused a hopelessly rich situation - it barely ran above idle - because the limited area of the sum of the holes in the plastic cover increased the negative pressure so significantly. If you must run it, be aware of its airflow-limiting effect and be prepared to downjet by 3 or more sizes. I personally think it strangles anything bigger than 50ccs. There was nothing wrong with the Polini filter itself, but the plastic rain cover stifles airflow. A lot.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
User avatar
benji
CB900F
CB900F
Posts: 1708
Joined: Mon Aug 10, 2015 9:15 pm
Location: renton,wa

Re: Spreedio Performance ... AF16 BUILD

Post by benji »

I wish there was a happy medium w aftermarket filters. It seems that they either flow too much or not at all. I've been looking at these remote mount airboxes for go carts lately. Ugly but look interesting.
User avatar
benji
CB900F
CB900F
Posts: 1708
Joined: Mon Aug 10, 2015 9:15 pm
Location: renton,wa

Re: Spreedio Performance ... AF16 BUILD

Post by benji »

Check this thing out. Looks like an air filter from a ww2 tank.
http://m.ebay.com/itm/44mm-Air-Filter-f ... ING_ACTIVE
User avatar
jakubman1
Elite
Elite
Posts: 608
Joined: Sat Oct 24, 2015 9:33 am
Location: Tampa

Re: Spreedio Performance ... AF16 BUILD

Post by jakubman1 »

So my top speed was 55. Sounds like it's winding out topped out
User avatar
R1Titan911
Elite
Elite
Posts: 356
Joined: Wed Aug 17, 2016 4:11 pm
Location: FloGrown

Re: Spreedio Performance ... AF16 BUILD

Post by R1Titan911 »

Thats sounds good for a Contessa? Swap rollers?

I have a Corsa that can fix that top speed :naughty:
User avatar
jakubman1
Elite
Elite
Posts: 608
Joined: Sat Oct 24, 2015 9:33 am
Location: Tampa

Re: Spreedio Performance ... AF16 BUILD

Post by jakubman1 »

New top speed 61mph with 8 gram rollers. Pretty boggy though
User avatar
jakubman1
Elite
Elite
Posts: 608
Joined: Sat Oct 24, 2015 9:33 am
Location: Tampa

Re: Spreedio Performance ... AF16 BUILD

Post by jakubman1 »

Does anyone know the compression ratio of the corsA?
I'm bout to get the corsA ported !!!! :coolcruise:
User avatar
jakubman1
Elite
Elite
Posts: 608
Joined: Sat Oct 24, 2015 9:33 am
Location: Tampa

Re: Spreedio Performance ... AF16 BUILD

Post by jakubman1 »

Does anybody know the compression ratio for the corsA kit ?
Post Reply