86 Frankinspree' build.

This is the place to discuss your build with other builders and solicit feedback and help with parts of your build: engine, body work, bolt ons, etc.

Moderator: Moderator

SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

86 Frankinspree' build.

Post by SpreeorDie85 »

So I sold my 1985 Spree today. Now I can start on my 1986 Spree.
It was raped for parts to build the 85 I sold today.
Im really digging the look and feel.
Its going to be for my GF but she's a badass so it doesnt have to be all pink and frilly.
Now Ill shut up and post pics.

Image



Image
SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

Re: 86 Frankinspree' build.

Post by SpreeorDie85 »

I know it's been a minute but I'm stockpiling parts.

Image

Image

Image

Image

So far I have an exhaust. New seat cover. I need a met or ruckus rear wheel.
Last edited by SpreeorDie85 on Sun Sep 17, 2017 7:25 pm, edited 1 time in total.
SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

Re: 86 Frankinspree' build.

Post by SpreeorDie85 »

I want to use these on the Spree. Not sure how to clamp them onto the Spree. I called SSS they had a
bolt on solution. Like most projects, I just need more monies. All tapped out from the stretch kit and AF16.

Image
SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

Re: 86 Frankinspree' build.

Post by SpreeorDie85 »

Cleaned off the AF16. The belt looks halfway nice.Come on USPS.
SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

Re: 86 Frankinspree' build.

Post by SpreeorDie85 »

Just in case anyone cares bought the elusive glovebox off eBay today.
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: 86 Frankinspree' build.

Post by Meatball »

Get that bad boy RUNNING! Can always add fancy handlebars later. You already need to cut/weld that stretch mount to fit the Spree frame and weld in a shock tab also.

But hey, thumbs up on the golvebox purchase! :2thumbs:
I need to find some new haters...the ones I have are starting to like me.
SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

Re: 86 Frankinspree' build.

Post by SpreeorDie85 »

Meatball wrote:Get that bad boy RUNNING! Can always add fancy handlebars later. You already need to cut/weld that stretch mount to fit the Spree frame and weld in a shock tab also.

But hey, thumbs up on the golvebox purchase! :2thumbs:
I was actually thinking of stretching the elite putting the af16 in and using sp50 engine for the Spree. I was told they fit the spree without cutting plastics and probably should have been the engine honda choose for the spree originally. Im really trying top avoid having to cut s*** up unless its necessary. Any thoughts or suggestions from fellow spree heads?
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: 86 Frankinspree' build.

Post by Meatball »

SpreeorDie85 wrote:
Meatball wrote:Get that bad boy RUNNING! Can always add fancy handlebars later. You already need to cut/weld that stretch mount to fit the Spree frame and weld in a shock tab also.

But hey, thumbs up on the golvebox purchase! :2thumbs:
I was actually thinking of stretching the elite putting the af16 in and using sp50 engine for the Spree.
The stretch mount you have would STILL need to be cut and re-welded to fit your SE50 frame. It doesnt fit either scooter frame you have. It is a bolt-in kit for 94-01 Elites....
I need to find some new haters...the ones I have are starting to like me.
SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

Re: 86 Frankinspree' build.

Post by SpreeorDie85 »

Meatball wrote:
SpreeorDie85 wrote:
Meatball wrote:Get that bad boy RUNNING! Can always add fancy handlebars later. You already need to cut/weld that stretch mount to fit the Spree frame and weld in a shock tab also.

But hey, thumbs up on the golvebox purchase! :2thumbs:
I was actually thinking of stretching the elite putting the af16 in and using sp50 engine for the Spree.
The stretch mount you have would STILL need to be cut and re-welded to fit your SE50 frame. It doesnt fit either scooter frame you have. It is a bolt-in kit for 94-01 Elites....
Thank you sir. Never thought I would the "problem" of what motor to put in what frame lol. A very welcomed one at that. I also purchased a polini air filter pod.
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: 86 Frankinspree' build.

Post by Meatball »

SpreeorDie85 wrote: I also purchased a polini air filter pod.
Do you have a carb to put it on?
I need to find some new haters...the ones I have are starting to like me.
SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

Re: 86 Frankinspree' build.

Post by SpreeorDie85 »

Meatball wrote:
SpreeorDie85 wrote: I also purchased a polini air filter pod.
Do you have a carb to put it on?
RIght now im using a stock AF16 carb but im going to wrap the tube so it doesn't run too lean, I overshot my budget so now Im just trying to the swap in and everything running

Most Recent Pics

Image

Af16 ncy kick start.

Image

Infamous glove box I purchased off ebay and Im pretty sure they are a member here as well.

I will say I got it extremely fast and in good shape.



Image

Stage 6 multimeter from my spree build.

Image

Kenda tires for the spree.

Image

Cheap Ebay led kit (green) tacky I know. It's my build I do what I want.

Image

Riser from SSS

Image

It looks odd but this a horn from Supra front clip I got from my past job at the JDM engine shop. Its super loud sounds like it should be on a moving van. This was also salvaged from my old spree that was sold it my other post.



Air filter . https://www.scooterswapshop.com/product ... od-filters

Ordered this for my elite . https://www.scooterswapshop.com/product ... -taillight

Can I use my spree rear wheel or do I need a new one. I was told ruckus or metro rear wheel.

I have a stock dio exhaust some were around the casa.

Yes I know I need better breaks once its up and running.

I'm really busy with school but trying to squeeze in time to work on the Spree any chance I get.

I will say when it comes to cutting the mount and welding it I will be relying on Brandon @SSS and hondaspree.net for guidance and advice.

So please stay tuned (lol cheesy old man joke) and help a noob out.
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: 86 Frankinspree' build.

Post by Meatball »

Im out....good luck.
I need to find some new haters...the ones I have are starting to like me.
SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

Re: 86 Frankinspree' build.

Post by SpreeorDie85 »

Meatball wrote:Im out....good luck.
That sucks..must have been the led's.

Anyway got some goodies today. The hoard grows

Image

Image
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: 86 Frankinspree' build.

Post by Meatball »

When you want to sell that taillight, I'll give you $50 for it.
I need to find some new haters...the ones I have are starting to like me.
SpreeorDie85
Goped
Goped
Posts: 78
Joined: Wed Feb 01, 2017 8:42 pm
Location: TEXAS

Re: 86 Frankinspree' build.

Post by SpreeorDie85 »

Image

So its been a while since my last post. Ive been really busy with school with no time for the scoots I did manage to get the 86 going. Spray painted front wheel and all. All tho the Spree is slow as * compared to the Elite 50s, its so agile and nimble I feel like I can ride it a lot harder. How can you not have fun on a Spree. Even the smallest trips are an adventure. :peace:
Post Reply