Project "Ube" Super Dio

This is the place to discuss your build with other builders and solicit feedback and help with parts of your build: engine, body work, bolt ons, etc.

Moderator: Moderator

User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

20190428_220853_resized.jpg
20190428_220853_resized.jpg (441.74 KiB) Viewed 13721 times
20190511_083819_resized.jpg
20190511_083819_resized.jpg (568.16 KiB) Viewed 13721 times
Super Dio ZX "Ube"
72 corsa
User avatar
motormike
Moderator
Moderator
Posts: 5488
Joined: Wed Dec 29, 2010 10:58 pm
Location: Glasgow, KY

Re: Project "Ube" Super Dio

Post by motormike »

808allday... :rock:
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
ntonar
Spree
Spree
Posts: 146
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: Project "Ube" Super Dio

Post by ntonar »

very nice!
User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

Thanks guys. I got the wheels on, still looking for polished hubs to match. Also put the ZX yellow headlight back on, for now...
20190720_083809_resized.jpg
20190720_083809_resized.jpg (507.49 KiB) Viewed 13655 times
20190720_083820_resized.jpg
20190720_083820_resized.jpg (502.13 KiB) Viewed 13655 times
20190730_181147_resized.jpg
20190730_181147_resized.jpg (432.54 KiB) Viewed 13655 times
Super Dio ZX "Ube"
72 corsa
User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

20190726_174229_resized_1.jpg
20190726_174229_resized_1.jpg (197.21 KiB) Viewed 13650 times
Super Dio ZX "Ube"
72 corsa
ReB0RnSativa_00_
Noob
Noob
Posts: 17
Joined: Sun May 05, 2019 2:23 pm

Re: Project "Ube" Super Dio

Post by ReB0RnSativa_00_ »

So fresh and so clean clean!!! :coolcruise:
User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

ReB0RnSativa_00_ wrote: Sun Sep 15, 2019 8:19 pm So fresh and so clean clean!!! :coolcruise:
Thank you. Hopefully I can get the wheels back on in time for your visit. I need new bearings for the polished hubs I got :2thumbs:
Super Dio ZX "Ube"
72 corsa
User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

I finally put in the new MHR full circle crank and new corsa on my spare block. Noticed the driveface splines on the crank had some play with the driveface. Didnt think anything of it until I started up the bike. Burning belt smell and it whined like a super charger. $300 crank defective from factory I guess. Nvr buying malossi again.
Ended up removing the boat anchor and buying a PG stock stroke stuffed crank. Installed into the case after making sure the drive face splines matched up good. Topspeed didnt seem all that much better from my old corsa and stock crank.
I was wondering why my bike was toping out at only 60mph when it could do 65mph before the motor swap. When I went into the cvt to replace my rollers I noticed the rear pulley was harder then normal to compress. I took off the torque spring and found out ot was binding since all the grease was gone :oops: slapped in a spare rear pulley and the topend is back and some :rock: . Im liking the way this PG stuffed crank pulls. Although the malossi full metal one pulled harder.
Screenshot_20190930-204017.png
Screenshot_20190930-204017.png (56.13 KiB) Viewed 13114 times
GPS on flat ground tucked. Speed radar sign read 1mph higher :eyeroll:
Super Dio ZX "Ube"
72 corsa
User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

I tried 3 different drive faces. 2 sym/zx and 1 af16e all had play on the malossi splines. Heck even the ruima had a tighter fit :crazy: china crank better fit than Itialian....
Stock af16e, ruima and malossi cranks
Stock af16e, ruima and malossi cranks
20190912-181310.jpg (69.85 KiB) Viewed 13111 times
20190912-181305.jpg
20190912-181305.jpg (61.5 KiB) Viewed 13111 times
20190912-181255.jpg
20190912-181255.jpg (66.5 KiB) Viewed 13111 times
And before people started saying it was a small spline crank :blah: I have a small spline af18e motor and the malossi crank is bigger... I learned my lesson always check new parts. I had this crank on my bench for about 1 year cant do anything with it now. Polini and PG FTW I would think for the price you pay for malossi stuff they would fit better. But Im not surpised their piston look like crap compared the the corsa's at least for Dio. I dont think Id use their parts for my jog project either. Dont want to risk or gamble my $ on it.
Super Dio ZX "Ube"
72 corsa
User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

Picked up some spare wheels
20191005_122410_resized.jpg
20191005_122410_resized.jpg (376.1 KiB) Viewed 12731 times
20191217_222827_resized.jpg
20191217_222827_resized.jpg (443.42 KiB) Viewed 12731 times
Finally got some chrome hubs
20191213_173128_resized.jpg
20191213_173128_resized.jpg (350.74 KiB) Viewed 12731 times
And brought an AF18e large crank motor back from my trip to Japan. Bought it for $20 :coolcruise:
Super Dio ZX "Ube"
72 corsa
User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

20191117_192831_resized.jpg
20191117_192831_resized.jpg (417.98 KiB) Viewed 12730 times
20191117_194520_resized.jpg
20191117_194520_resized.jpg (415.6 KiB) Viewed 12730 times
20191117_194455_resized.jpg
20191117_194455_resized.jpg (392.89 KiB) Viewed 12730 times
Super Dio ZX "Ube"
72 corsa
User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

20191227_095421_resized.jpg
20191227_095421_resized.jpg (550.73 KiB) Viewed 12730 times
20191227_095349_resized.jpg
20191227_095349_resized.jpg (516.16 KiB) Viewed 12730 times
Super Dio ZX "Ube"
72 corsa
User avatar
harleyracer59
Elite
Elite
Posts: 327
Joined: Tue Jun 05, 2018 3:56 pm
Location: Nickastan ca

Re: Project "Ube" Super Dio

Post by harleyracer59 »

where did you get those solid wheels, and what is the hub bolt spacing???? ive been looking for a set of those in 2,10-2.75x 10 with a 141 pcd bolt pattern.. wanna sell those? my gyro and chopper spree will thank you.. lol :naughty:
User avatar
sum_azn_kid
Goped
Goped
Posts: 90
Joined: Sun Sep 24, 2017 7:14 pm
Location: hawaii

Re: Project "Ube" Super Dio

Post by sum_azn_kid »

harleyracer59 wrote: Sun Jan 05, 2020 6:54 pm where did you get those solid wheels, and what is the hub bolt spacing???? ive been looking for a set of those in 2,10-2.75x 10 with a 141 pcd bolt pattern.. wanna sell those? my gyro and chopper spree will thank you.. lol :naughty:
Found in japan, I also made some friends there and they shipped it to me. Also there is a guy on Instagram from Philippines that can get them and chrome them. They are same PCD ad sym/kymco hubs I believe 4x140ish. And 2.50x10. TBH if it is for a gyro you maybe better off using atv wheels. Or having machined machines redrill a solid dwt wheel for you
Super Dio ZX "Ube"
72 corsa
User avatar
harleyracer59
Elite
Elite
Posts: 327
Joined: Tue Jun 05, 2018 3:56 pm
Location: Nickastan ca

Re: Project "Ube" Super Dio

Post by harleyracer59 »

sum_azn_kid wrote: Mon Jan 13, 2020 12:09 am
harleyracer59 wrote: Sun Jan 05, 2020 6:54 pm where did you get those solid wheels, and what is the hub bolt spacing???? ive been looking for a set of those in 2,10-2.75x 10 with a 141 pcd bolt pattern.. wanna sell those? my gyro and chopper spree will thank you.. lol :naughty:
Found in japan, I also made some friends there and they shipped it to me. Also there is a guy on Instagram from Philippines that can get them and chrome them. They are same PCD ad sym/kymco hubs I believe 4x140ish. And 2.50x10. TBH if it is for a gyro you maybe better off using atv wheels. Or having machined machines redrill a solid dwt wheel for you

its for the front of my gyro S I have 235/30-10 tires om 8" solid aluminum rims on the rear. I actually found a set on Y.A.J. 2.50X10" with 140 PCD bolt pattern. won the auction for 2 rims, 1 new tubless 90/90-10 tire. I think ill trow the second one on my chopper spree
edit: no clue why theyre upside down? I give up. you get the idea.... why is it so hard to post pics on this forum??? lol *? :*:
Attachments
2 solid rims.jpg
2 solid rims.jpg (463.14 KiB) Viewed 12213 times
image.jpg
image.jpg (160.28 KiB) Viewed 12213 times
image - Copy.jpg
image - Copy.jpg (123.2 KiB) Viewed 12213 times
Post Reply