Spree engine test bench wiring

This is the place to discuss your build with other builders and solicit feedback and help with parts of your build: engine, body work, bolt ons, etc.

Moderator: Moderator

Post Reply
busaslidr
Noob
Noob
Posts: 1
Joined: Wed Apr 08, 2020 7:12 pm

Spree engine test bench wiring

Post by busaslidr »

Hello all!

I'm not new but have been gone for awhile and couldn't find my login info so registered again.

Here's what I'm doing - I'm setting up a test bench for one of my spree engines and I only want to wire up the CDI without the charging system and any wiring harness, to just get the engine running again.

I have wired how the service manual shows, Rd/ BLK to stator
Green to ground
BLK/ylw to coil
Blu wire to pulse coil

Firing the starter with a remote battery and switch.

I'm getting about 75 ac volts to the spark coil but no spark I'm at my wit's end trying to figure this out. Do l have something connected wrong?
Post Reply