Panel Restoration
Posted: Fri Jun 25, 2021 12:02 am
Doing it the hard way on the old 87 with the body panels. Started sanding all by hand with 220 grit, a razor blade and a Scotch-Brite pad. Then 320, more blade and pad since it had such a rough sand job prior followed by 400 and 500, which is where it is now. Will be seeing 600, 1000 and 1200 before the buff and polish. Very long and labor intensive process, but the results are amazing so far. No deep scrapes and super smooth. Will post pics of the finished product when I get there.