I am in the process of changing my belt on my spree AGAIN. and i noticed that the FRONT PULLY IS LOOSE...
the gear is wiggley? IS THIS NORMAL NORMAL??
There is no washer and the NUT IS CAPPED I LOOKED IN MY MANUAL AND THE NUT SHOWN is OPEN not capped like mine....?
SHOULD I REPLACE THE CAPPED NUT AND GET AN OPEN NUT WITH A WASHER??
FRONT PULLY??
Moderator: Moderator
- mustangwagz
- Elite
- Posts: 483
- Joined: Sun Mar 21, 2010 9:10 pm
- Location: Western, PA
Re: FRONT PULLY??
either get a washer and keep using the capped nut or get a capless nut. Not sure what bike ya got but i kno my spree front pulley has a washer and an open nut..
either way, you want that front pulley tight!
either way, you want that front pulley tight!
-Zac ![coolcruise :coolcruise:](./images/smilies/11173.gif)
1981 HD-Ironhead Sporty. 1000cc, 4 speed, drag pipes, and drag bars.. (chic/cop magnet)
72 Rupp Roadster 2 (aka. RUMP ROASTER!!)
05 vinson
78 bronco (Log skiddin Hog!!)
![coolcruise :coolcruise:](./images/smilies/11173.gif)
1981 HD-Ironhead Sporty. 1000cc, 4 speed, drag pipes, and drag bars.. (chic/cop magnet)
72 Rupp Roadster 2 (aka. RUMP ROASTER!!)
05 vinson
78 bronco (Log skiddin Hog!!)
- fightingplankton
- CB900F
- Posts: 1119
- Joined: Wed Oct 28, 2009 8:57 pm
- Location: Yakima, Wa
Re: FRONT PULLY??
just had similar thing happen on my bike.
i put a washer between the 2 halves and it wore down the back half a bit and the nut was tightened all the way down(not a capped one).
to fix this, i just put another washer between the 2 halves. eventually i will just replace the worn down pulley, but atm, it works.
i put a washer between the 2 halves and it wore down the back half a bit and the nut was tightened all the way down(not a capped one).
to fix this, i just put another washer between the 2 halves. eventually i will just replace the worn down pulley, but atm, it works.
'86 spree
'86 aero50
'83 aero80
'86 aero50
'83 aero80
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: FRONT PULLY??
And some loctite too! ![smile :smile:](./images/smilies/icon_e_biggrin.gif)
![smile :smile:](./images/smilies/icon_e_biggrin.gif)
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts