carb main bolts

edwardzx7 · Post by **edwardzx7** » Sat Dec 17, 2005 6:00 am

anyone know the size and lenth of the 2 main carb bolts that hold the carb on?not the ones that go on the pulley part,but the main part that just like floats there.4 carb bolts total.only need 2.

Post by **noiseguy** » Sun Dec 18, 2005 11:06 am

Couple of ways to do this (you must be working on an Elite, Spree have 2:)

1) Use a toothpick/paperclip/wire, run this down the hole and measure the length with the carb intake in place. Use a slightly shorter fastener for that hole.

2) Go to partsfish.com and look up the bolts there, if you select them it lists the length, in millimeters.

Have fun.

edwardzx7 · Post by **edwardzx7** » Mon Dec 26, 2005 2:43 pm

thanks but does not help any!

uspmale · Post by **uspmale** » Tue Dec 27, 2005 12:52 am

Edd, If you can send a pic. with a reference scale, I'LL be able to help.
Or be more specific. on the part.
I have literally thousands of Spree parts from A to Z.
Thanks, Greg
uspmale@yahoo.com

edwardzx7 · Post by **edwardzx7** » Fri Dec 30, 2005 2:39 pm

,this should help,

uspmale · Post by **uspmale** » Fri Dec 30, 2005 4:56 pm

It looks like you need 2 carb bolts,right?
I've got several dozen. E-mail me cause they're 2 different sizes.
uspmale@ yahoo.com

lonelywanderer · Post by **lonelywanderer** » Mon Jan 02, 2006 7:22 pm

if you need the two that bolt the carb to the manifold its 6x1.00 mm

hrnytrtlsgsxr · Post by **hrnytrtlsgsxr** » Mon Jan 02, 2006 7:28 pm

lonelywanderer wrote:if you need the two that bolt the carb to the manifold its 6x1.00 mm

that sounds right

lonelywanderer · Post by **lonelywanderer** » Mon Jan 02, 2006 7:34 pm

hrnytrtlsgsxr wrote:
lonelywanderer wrote:if you need the two that bolt the carb to the manifold its 6x1.00 mm
that sounds right