Side stand
Moderator: Moderator
- KingJeff801
- Board Supporter
- Posts: 782
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Side stand
Does anyone know which if any side stand on the jiangwayne website will work for my 2001 elite S?
2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
Re: Side stand
nope! those are for the jdm dio. you have to call the scooter/moped shops in hawaii for the sidestand for your bike. Moped company ,Glenns cycles, vt cycles, quick fix cycles. they run about $90+shipping for the bracket and leg.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
-
- Spree
- Posts: 159
- Joined: Thu Jun 17, 2010 8:06 pm
- Location: Rancho Cucamonga, CA
Re: Side stand
does anyone try to custom a side stand, maybe get a bicycle side stand it make it fit onto the scooter
2003 Yamaha R1 998cc SOLD
1997 Honda Elite S 72cc SOLD
2007 SYM DD50 72CC X2
Goped sport 29cc
1997 Honda Elite S 72cc SOLD
2007 SYM DD50 72CC X2
Goped sport 29cc
-
- Elite
- Posts: 722
- Joined: Thu Apr 19, 2007 6:40 pm
- Location: oregon coast
Re: Side stand
i got one off a motorcycle and welded it on
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Side stand
Sure, but the bicycle one failed quickly. I would go with a motorcycle one. You need to find out what lean angle you want the stand leg to swing at and then weld it. You can adjust the bike lean angle by cutting the leg shorter.da808nanospeed wrote:does anyone try to custom a side stand, maybe get a bicycle side stand it make it fit onto the scooter
motormike wrote:Errands become adventures.
-
- Elite
- Posts: 722
- Joined: Thu Apr 19, 2007 6:40 pm
- Location: oregon coast
Re: Side stand
You must also brace it, the metal for the floor boards is very flimsy