circlip destroys cylinder and freezes piston... help
Moderator: Moderator
circlip destroys cylinder and freezes piston... help
long story short: circlip came loose and wedged itself b/n the piston and the cylinder wall. top end is * but stuck together. i can get some purchase on the clip but i cant free it. any ideas?
1986 Spree SE:
- pulley mod
'85 head
SB50 intake, reeds, carb
UNI filter
44mm bbk
3x10 conti zipps
next:
taz gears, sa50 clutch w/ 2k springs
Re: circlip destroys cylinder and freezes piston... help
ok nvm. i got the d*** thing out, but i am worried about my brand new crank bearings. i dont remember what it felt like to turn the crank over by hand. it certainly doesnt turn freely but it isnt rough and there is no play. is this in the realm of normal?
1986 Spree SE:
- pulley mod
'85 head
SB50 intake, reeds, carb
UNI filter
44mm bbk
3x10 conti zipps
next:
taz gears, sa50 clutch w/ 2k springs
Re: circlip destroys cylinder and freezes piston... help
Yes the mag/stator and seals will put a little resistance on it. Look to see if there is metal shavings on the crank and in the case. You might have to rinse the case out if there is.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: circlip destroys cylinder and freezes piston... help
I feel for you.. Had that happen recently myself. Personally felt safer for me to split the case and clean everything, didn't trust just using a flashlight and mirrors to see all.
Have you removed jug yet? if not it probably won't turn freely. good luck
Have you removed jug yet? if not it probably won't turn freely. good luck
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges