So the Elite me its maker today. The sweltering heat and running a bit too lean melted the piston I'm sure...
I'll tear it down when i get a chance and post pics but for now I'm looking into Big Bore Kits but I'm not sure what else I need to run a Big bore kit I'm sure i will need a set of carb jets so i can get it tuned it what else is needed?
Time for a Rebuild!
Moderator: Moderator
-
- Noob
- Posts: 12
- Joined: Sat May 21, 2011 3:08 am
- Location: Missouri
Re: Time for a Rebuild!
Why was it running lean?
1986 Spree w/ '87 SE50 motor
1985 Aero 50 w/ Dio motor: On Hold
1985 Aero 50 w/ Dio motor: On Hold
-
- Noob
- Posts: 12
- Joined: Sat May 21, 2011 3:08 am
- Location: Missouri
Re: Time for a Rebuild!
I didnt get the factory airbox with it.. All it came with was a UNI filter and I was waiting on the jets to come in the mail but who knows how long the kid rode it really leaned out because it only made it a total of 6 miles with me on it..
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: Time for a Rebuild!
So, did you have a nice walk?
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
-
- Noob
- Posts: 12
- Joined: Sat May 21, 2011 3:08 am
- Location: Missouri
Re: Time for a Rebuild!
Lol I was a mile from home had a friend swing thru and pick me and the scooter up... Embarrassing
-
- Noob
- Posts: 12
- Joined: Sat May 21, 2011 3:08 am
- Location: Missouri
Re: Time for a Rebuild!
So with say a 72cc Polini kit and bigger carb jet what else would I need to safely run the scooter? I know I will need a pipe and some trans/clutch work but are those things that could hold off or do I need to do all of it at the same time? I feel like I'm missing something and I'm new to scooters and two strokes in general