i re did my intake windows and went alittle too deep on bottom.........
put hole in bottom of block/ window... jb weld marine cold welded it. Seems to run fine till im wot/going fast it misses like timing is off not really a bog..... had it tune good before .... i re checked the area and put a 2nd and 3rd coat to be sure,,,,, put a leaner jet same, put a richer jet same problem???? will run it tomarrow when 2nd 3rd coat dries.....
yes again.....trouble....misfire at wot....
Moderator: Moderator
-
- Goped
- Posts: 71
- Joined: Sun Sep 12, 2010 3:46 am
Re: yes again.....trouble....misfire at wot....
You do know that they can actually weld aluminum and JB will not last long.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Goped
- Posts: 71
- Joined: Sun Sep 12, 2010 3:46 am
Re: yes again.....trouble....misfire at wot....
i figure,,,,,but just till i get another block....
Re: yes again.....trouble....misfire at wot....
Why not just fix the one you have properly?Pancake808 wrote:i figure,,,,,but just till i get another block....
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Goped
- Posts: 71
- Joined: Sun Sep 12, 2010 3:46 am
Re: yes again.....trouble....misfire at wot....
Cost too much.... I would have to remove crank and seals to weld.... I gota sym dd50 block for 80 bucks already cut for stroker. So I'm gonna port the new block and swap it out.
Re: yes again.....trouble....misfire at wot....
Why? It's not like you need to weld up a 3" crack. My welder guy does this kind of stuff all the time for a friend who races outboards still.Pancake808 wrote:Cost too much.... I would have to remove crank and seals to weld.... I gota sym dd50 block for 80 bucks already cut for stroker. So I'm gonna port the new block and swap it out.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree