Trying to get your Spree/Elite to run, or run better? Post your questions here.
Moderator: Moderator
Mike
Spree
Posts: 141 Joined: Sat Dec 31, 2005 7:00 pm
Location: Macomb, Michigan
Post
by Mike » Mon Apr 03, 2006 9:03 pm
my airbox tube is nicely sealed around the carburetor but it still bogs out SOMETIMES. it is still getting too much air. i sealed alot of the air box so i dont know what else to do. please help me out
'86 Black/red two-tone Honda Spree, pretty much stock.
noiseguy
Site Admin
Posts: 4430 Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:
Post
by noiseguy » Tue Apr 04, 2006 10:36 am
Is the heat insulator (plastic bit b/t the carb and manifold) in the right way? Orings should not be touching, make sure it's not upside down and not sealing.
Mike
Spree
Posts: 141 Joined: Sat Dec 31, 2005 7:00 pm
Location: Macomb, Michigan
Post
by Mike » Tue Apr 04, 2006 2:44 pm
i have brand new o rings and insulator. the insulator IS on the right way. what do you mean when you say the o rings should not be touching?
'86 Black/red two-tone Honda Spree, pretty much stock.
MySpree
CBR1000RR
Posts: 3298 Joined: Mon Jul 23, 1973 10:24 am
Location: Troy michigan
Contact:
Post
by MySpree » Tue Apr 04, 2006 5:12 pm
the o ring should ber faceing the manifold... and how ur bystarter sealing?
Mike
Spree
Posts: 141 Joined: Sat Dec 31, 2005 7:00 pm
Location: Macomb, Michigan
Post
by Mike » Tue Apr 04, 2006 7:08 pm
o okay then yeah the insulator is on the right way. i have new o rings on the bystarer too. in fact all the carb o rings are new i just replaced them.
'86 Black/red two-tone Honda Spree, pretty much stock.
MySpree
CBR1000RR
Posts: 3298 Joined: Mon Jul 23, 1973 10:24 am
Location: Troy michigan
Contact:
Post
by MySpree » Tue Apr 04, 2006 9:49 pm
maby there is a hole in the airbox someware...
darat
Veteran OG
Posts: 3133 Joined: Fri Jul 23, 2004 10:24 am
Location: Fraser Michigan
Contact:
Post
by darat » Tue Apr 04, 2006 10:00 pm
or u have a cracked carb?
MICHIGAN MOPED MAFIA Co Founder VET OG. 95 YAMAHA JOG 70CC
MySpree
CBR1000RR
Posts: 3298 Joined: Mon Jul 23, 1973 10:24 am
Location: Troy michigan
Contact:
Post
by MySpree » Wed Apr 05, 2006 10:16 am
or ur intake is leaking were it mounts onto the base
Mike
Spree
Posts: 141 Joined: Sat Dec 31, 2005 7:00 pm
Location: Macomb, Michigan
Post
by Mike » Wed Apr 05, 2006 2:58 pm
MySpree wrote: or ur intake is leaking were it mounts onto the base
i have that sealed. im gonna try and figure whats up with it today
'86 Black/red two-tone Honda Spree, pretty much stock.
MySpree
CBR1000RR
Posts: 3298 Joined: Mon Jul 23, 1973 10:24 am
Location: Troy michigan
Contact:
Post
by MySpree » Wed Apr 05, 2006 3:30 pm
is your oil line on?
Mike
Spree
Posts: 141 Joined: Sat Dec 31, 2005 7:00 pm
Location: Macomb, Michigan
Post
by Mike » Wed Apr 05, 2006 4:20 pm
i found a nice new vacuum tube with a VERY tight fit and now itst working alot better so the spree is good to go. thanks guys.
'86 Black/red two-tone Honda Spree, pretty much stock.
MySpree
CBR1000RR
Posts: 3298 Joined: Mon Jul 23, 1973 10:24 am
Location: Troy michigan
Contact:
Post
by MySpree » Wed Apr 05, 2006 5:37 pm
good to hear