home made tool to take the nuts off the crank
Moderator: Moderator
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
home made tool to take the nuts off the crank
heres a tool i made to get the nuts off the crank ... the hole in the center show the nut on the crank is big anuff to get a socket in our the fly puller in... and it works well to pull the Variator off yes you need to tack off the cover and fan but its only 4 more boults ... how i made it i use the fan and drill the holes to get them in the wright place ... then put in on the fly wheel and marked it and cut the middle hole...
good luck...
swimmingfree
good luck...
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: home made tool to take the nuts off the crank
Looks good swim. Mine is made from the tire iron/lug remover from a cars stock jack kit. Works great and had a nice handle.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: home made tool to take the nuts off the crank
just some scrap still i had laying around ... like to see your set up ...
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: home made tool to take the nuts off the crank
homemade tools, nice
I built a holder using large pliers (it pictured with a 3/8 ratchet) and an 8mm bolt.
In use, a piece of rectangular steel tube OR a length of inner tube is placed over the jaws to be sure it cannot bite a hand.
I built a holder using large pliers (it pictured with a 3/8 ratchet) and an 8mm bolt.
In use, a piece of rectangular steel tube OR a length of inner tube is placed over the jaws to be sure it cannot bite a hand.
Re: home made tool to take the nuts off the crank
Hi here is mine.
cool home made tools
cool home made tools
- Attachments
-
- 20140816_135234[1].jpg (223.9 KiB) Viewed 5509 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: home made tool to take the nuts off the crank
nice tools you guys have made ...
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: home made tool to take the nuts off the crank
Sweet cobbled awesomeness.
- Red Eft Performance
- Elite
- Posts: 449
- Joined: Sat Jun 11, 2011 10:40 am
- Location: maine
Re: home made tool to take the nuts off the crank
Love them!
As simple as that!
Keith
As simple as that!
Keith
Red Eft Performance
To benefit forum members REP will beat the price of any legit/active Business/website
Elite, Dio, Aero, AF16/AF05 Cylinder kits,Clutches,Variators,Belts,CDI boxes,Reeds,Clutch bells,Pipes
Malossi,Polini,Fabrizi,Anything!
View products click => Here
To benefit forum members REP will beat the price of any legit/active Business/website
Elite, Dio, Aero, AF16/AF05 Cylinder kits,Clutches,Variators,Belts,CDI boxes,Reeds,Clutch bells,Pipes
Malossi,Polini,Fabrizi,Anything!
View products click => Here
Re: home made tool to take the nuts off the crank
...amazed, but never surprised...
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
Re: home made tool to take the nuts off the crank
hi forum homemade crank puller.
- Attachments
-
- 20150201_093718.jpg (186.06 KiB) Viewed 5275 times
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: home made tool to take the nuts off the crank
Hey ped
Does that crank puller work to pull both bearings into the case?
Does that crank puller work to pull both bearings into the case?
1985 Aero NB50M - Stock
1986 Spree NQ50 - Stock
1986 Spree NQ50 - Stock
Re: home made tool to take the nuts off the crank
yes, it has two different sized nuts welded onto the clamp threads rod.spark_ee wrote:Hey ped
Does that crank puller work to pull both bearings into the case?
I had to use two clamps from Harbor Freight. They were on sale 299.
take a look at photos on the homemade crank puller thread.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: home made tool to take the nuts off the crank
Some great ideas on this thread. Thank ped for the response.
1985 Aero NB50M - Stock
1986 Spree NQ50 - Stock
1986 Spree NQ50 - Stock