Dies after hitting bumps

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

scootfast
Board Supporter
Board Supporter
Posts: 194
Joined: Sat Aug 30, 2014 5:20 pm
Location: Provincetown,ma

Re: Dies after hitting bumps

Post by scootfast »

If you bought one of those cheap spark plug wires from ebay I would check that. I learned the hard way. It was a long push home. If you want quality parts always ask Brandon at scooterswapshop. He"ll take care of you. Lots of know how. Jim
mitsukid124
BMX
BMX
Posts: 31
Joined: Mon Nov 18, 2013 11:25 am
Location: minnesota

Re: Dies after hitting bumps

Post by mitsukid124 »

I stated in my last post that i figured out the issue. The choke bowl was dented. This is caused by someone installing the carb and switching the positions of the two carb mounting bolts. If you put the long bolt in the wrong side it dents it and does not allow the bystarter to choke the motor after it is warm. The dent can be seen on my second page.


Therefore this has been resolved.
Post Reply