Compatible parts for elite

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
FunkeyMonkey
Spree
Spree
Posts: 112
Joined: Sun May 15, 2016 3:36 pm
Location: Idaho

Compatible parts for elite

Post by FunkeyMonkey »

Looking for 01 elite 50 coil, what other years/models use the same coil?
Attachments
mNczxblb2ypEzNDn0_WwKtQ.jpg
mNczxblb2ypEzNDn0_WwKtQ.jpg (3.92 KiB) Viewed 2795 times
2001 Honda Elite 50
72cc malossi cylinder
24mm polini carb
Naraku intake
User avatar
vintagegarage
Elite
Elite
Posts: 817
Joined: Tue Jun 23, 2015 7:03 pm
Location: Florida

Re: Compatible parts for elite

Post by vintagegarage »

Funkey,
If you check online, for a 2001 SA50 coil, you will see they are still at stock at Honda:

http://www.hondapartshouse.com/oemparts ... re-harness

Then click on the link in the part number, or put the number in the search near the bottom of the page.. i.e. 30510-GS7-505 to bring up the detail page for the part, and then click on the link called "where used", and you will see that the same coil is used on SA50s from 1994 to 2001, but is not used on any other models. If it were used on something obscure, like a Honda Express, it would add it to the where used list.
FunkeyMonkey
Spree
Spree
Posts: 112
Joined: Sun May 15, 2016 3:36 pm
Location: Idaho

Re: Compatible parts for elite

Post by FunkeyMonkey »

Awesome thanks vintage didn't notice that before
2001 Honda Elite 50
72cc malossi cylinder
24mm polini carb
Naraku intake
Post Reply