Request for input - Parts Spree 84/85 vs 86/87 and SB50

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2898
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: Request for input - Parts Spree 84/85 vs 86/87 and SB50

Post by martynkim » Sat Aug 07, 2010 12:45 pm

Wheelman-111 wrote:Greetings:

From reading here, the carb numbers vary by year but they interchange freely. The Spree carb is quite different from the Aero/Elite carb physically. The bystarter is on the opposite side of the venturi, so an Aero carb can foul the shock. Even though they might fit. I suspect the Spree carbs won't work on the Elite/Aero engines due to a very small pilot orifice - cast-in to the body.

Thanks for the answer as I am looking at the interchange of an 85 to an 87 Spree. The parts fiche from my local Honda shop shows different P/N's. I understand the differences in the variated AF motor and the non varied Spree carbs.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts

b18Eric
Noob
Noob
Posts: 10
Joined: Sun Aug 08, 2010 9:30 am

Re: Request for input - Parts Spree 84/85 vs 86/87 and SB50

Post by b18Eric » Tue Aug 17, 2010 1:25 pm

The flywheel from an 84 will work with the alternator coil from an 86 so no need to swap the coils/flywheel as a pair! Got pics if needed.

Bossshelby
Spree
Spree
Posts: 105
Joined: Fri Sep 12, 2008 8:28 pm
Location: Clinton Twp Michigan
Contact:

Re: Request for input - Parts Spree 84/85 vs 86/87 and SB50

Post by Bossshelby » Fri Jul 31, 2015 8:06 am

The spree has two different gears. the earlier is 12 tooth and the later has 13 tooth but the big gears stayed at 82 tooth for all years. The 12 tooth has a limited speed of 25mph.
Have 4, 84-86 Sprees
Sprite-85 Honda spree
-87 elite 50 engine
-90 jet
-9 and 10 gram rollers
-Highly ported intake and exhaust
-custom performance muffler
3 original sprees. A red, black and white

jakewright
Noob
Noob
Posts: 1
Joined: Sat Nov 07, 2015 2:21 am
Location: Missouri

Re: Request for input - Parts Spree 84/85 vs 86/87 and SB50

Post by jakewright » Sat Nov 07, 2015 2:25 am

Will 86 nq50 transmission drive gears fit in my 85 nq50 transmission case?

User avatar
eclark5483
CB900F
CB900F
Posts: 1352
Joined: Thu Apr 14, 2016 5:15 am
Location: Spencer Iowa
Contact:

Re: Request for input - Parts Spree 84/85 vs 86/87 and SB50

Post by eclark5483 » Sun Dec 11, 2016 9:42 pm

84/85 kickstand is shorter then 86/87 kickstand.
Indian Motorcycle tech @ Polaris Inc., B.A. Information Technology, A.A. Engineering
3 Sprees
1 ATM50-A1
1 Indian AMI-50
The World's Greatest Spree: https://www.youtube.com/watch?v=lU49lL_Xx4s
Want to make a Spree engine go fast? CLICK HERE: LINK

chewy812
Noob
Noob
Posts: 2
Joined: Mon Aug 12, 2019 11:57 pm

Re: Request for input - Parts Spree 84/85 vs 86/87 and SB50

Post by chewy812 » Tue Aug 13, 2019 12:09 am

86 Honda spree Nq50


Will a 87 carburetor work on a 86 Honda spree ?

User avatar
eclark5483
CB900F
CB900F
Posts: 1352
Joined: Thu Apr 14, 2016 5:15 am
Location: Spencer Iowa
Contact:

Re: Request for input - Parts Spree 84/85 vs 86/87 and SB50

Post by eclark5483 » Tue Aug 13, 2019 2:30 am

yes
Indian Motorcycle tech @ Polaris Inc., B.A. Information Technology, A.A. Engineering
3 Sprees
1 ATM50-A1
1 Indian AMI-50
The World's Greatest Spree: https://www.youtube.com/watch?v=lU49lL_Xx4s
Want to make a Spree engine go fast? CLICK HERE: LINK

chewy812
Noob
Noob
Posts: 2
Joined: Mon Aug 12, 2019 11:57 pm

Re: Request for input - Parts Spree 84/85 vs 86/87 and SB50

Post by chewy812 » Tue Aug 13, 2019 11:56 am

Need some help on this 86 Honda spree I put a carburetor in from a 87 Honda spree. Now I can’t keep it running I adjust the air mixture screw and nothing happens. And when I give it full throatle it dies. Any idea

I replaced the carburetor cause I put the long screw in where the short one goes will that cause a problem ?

Post Reply