New Carb
Moderator: Moderator
-
- Noob
- Posts: 2
- Joined: Thu May 13, 2021 6:32 pm
New Carb
I bought a new carb and was putting it on my elite SA50 and it seems like the stock throttle cable is pulling it too hard. The needle is the only thing that shows inside of the carb. Is there a way to loosen the throttle cable?
Re: New Carb
What’s wrong with the original one?
1985 Spree AF16: viewtopic.php?f=20&t=31053
2001 Elite Daily: viewtopic.php?f=16&t=31397&p=272223#p272223
2001 Elite Daily: viewtopic.php?f=16&t=31397&p=272223#p272223
-
- Noob
- Posts: 2
- Joined: Thu May 13, 2021 6:32 pm
Re: New Carb
It was so dirty and covered in oil from the original owner and was full of oil as well so i just got a new one to save me the time it would take to clean the old one.
Re: New Carb
99% of the time it’s worth cleaning out the stock carb or finding an OEM used replacement. Most aftermarket clone carbs aren’t made to the same standards and will never let the bike run properly.
1985 Spree AF16: viewtopic.php?f=20&t=31053
2001 Elite Daily: viewtopic.php?f=16&t=31397&p=272223#p272223
2001 Elite Daily: viewtopic.php?f=16&t=31397&p=272223#p272223