Trying to get your Spree/Elite to run, or run better? Post your questions here.
Moderator: Moderator
spreeGR
Noob
Posts: 2 Joined: Tue Jul 08, 2008 8:19 pm
Post
by spreeGR » Tue Jul 08, 2008 8:27 pm
I have a 86 Spree with 3,100 miles on it. I bought it earlier this summer and it has been running great at 30+ mph.
Last week I stopped in a ACEtrue value and bought some generic 2 stroke oil. The spree ran with no problems.
Yesterday, I put another small container of the truevalue oil in the spree and today I can only top out at 25mph.
Sorry for the lack of info...... but do you have any ideas as to what could cause me to lose 5mph overnight?
Kenny_McCormic
CBR1000RR
Posts: 4957 Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan
Post
by Kenny_McCormic » Tue Jul 08, 2008 10:24 pm
You need INJECTOR OIL! regular premix crap wont do.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
tru72
CB900F
Posts: 1045 Joined: Wed Aug 01, 2007 3:43 am
Location: HaWaii
Contact:
Post
by tru72 » Wed Jul 09, 2008 4:05 am
using anything besides good "moped" injector oil will be the death of that bike! Well not really death, but bad oil wil cause excessive carbon build up in the exhaust port, head, and exhaust..
do your bike a favor and buy some thing good for her!
aloha
D
spreeGR
Noob
Posts: 2 Joined: Tue Jul 08, 2008 8:19 pm
Post
by spreeGR » Wed Jul 09, 2008 9:00 am
OK OK I guess I blew it with the generic crap........ Ha ha
After draining the bad oil out, is there anything (quick and easy) I should do to clean it before I put the new oil in?
Thanks in advance
Kenny_McCormic
CBR1000RR
Posts: 4957 Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan
Post
by Kenny_McCormic » Wed Jul 09, 2008 12:49 pm
Nope, just put new oil in and bleed the line.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
-aL-
Elite
Posts: 519 Joined: Mon Jul 23, 1973 10:24 am
Location: Escanaba, MI
Post
by -aL- » Tue Jul 15, 2008 3:03 am
make sure the compression is where it should be as well...maybe that * oil did more damage than you think
Ridin' Dirty on one of my 1989 Honda Elite E's