I'm in need of a few measurements from NEW OEM Honda gaskets as listed below.
1). Cylinder Head Gasket Thickness
2). Cylinder Base Gasket Thickness
Please keep in mind that the gaskets to be measured will need to be in new or near-new condition as they will affect my future deck and port height. Any gaskets for the 94-01 SA50 motors will work. Thanks much guys!
SA50 Gasket Measurements Needed
Moderator: Moderator
SA50 Gasket Measurements Needed
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
Re: SA50 Gasket Measurements Needed
unless you change the gear ratio forget about the deck/porting= all for nothing....
some people dream of speed, i own your dreams!
Re: SA50 Gasket Measurements Needed
I have a set of 9.1:1 gears at home, but thanksmaddog wrote:unless you change the gear ratio forget about the deck/porting= all for nothing....
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto
- FTP 140cc Kit
- Stock 125cc undertail exhaust
2006 Xkeleton Trickster
- Lifan 90cc auto